Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by kuser

  1. kuser

    Call pilo 100/150

    you have to get into call pilot through your laptop and click on mailbox admin., then class of service. the classes of service will appear. look for password expiration setting under the class of service you are using and set it to 0.
  2. kuser

    TFTP Server Failover on Call Manager

    Customer has the Call Manager Publisher identified as primary DHCP and TFTP server. They requested to add another Call Manager subscriber server as the failover. I added the approp ip address to the Call Mgr servers in all the related scope 150's under dhcp services. I'm able to verify both...
  3. kuser

    Cisco Unity

    I had similar problem as well, I know I'm reading this months later but here's what i did to resolve the problem: Cisco Unity Subscriber issues: symptom: can't complete configuration of subscriber mailboxes 1. Go Tools run dbwalker program to identify pending problems (if it tells you to...
  4. kuser

    call pilot 150 (call center): unable to go to nxt avail agent

    Working on Call Pilot 150, using Call Center. Lines for Line Answer in Auto Attendant are not pointed to Call Center (instead AA, table 1), ie, they want receptionist to answer all calls and manually transfer to cdn 280. Calls can be retrieved by available agents before dropping into ACD...
  5. kuser

    call pilot login

    Same thing happened to me. I used my laptop w/the use of a crossover cable to get into the Call Pilot, assigning to my laptop ip address 192.168.110.11 (because call pilot's default is 192.168.110.10). Confirm by going into dos and ping both ip addresses. Once successful, open up Internet...
  6. kuser

    Can't light MWI across CCIS // NEC 2000 to Elite IPK

    I have a similiar scenario using Elite IPK at remote site, CCIS connects with a NEC 2400/host site. They're using INEAXMAIL AD 40 at the host site. Also, they're using MCI link, however message waiting works at the host site, but not at the IPK remote site (ie, at remote we still get messages...
  7. kuser

    STARTALK WILL NOT REBOOT

    It seems I have a bad power supply to a StarTalk 2.0.1 using 2.0.4 software. That is, fan doesn't come on and I don't hear anything powering up. Does anyone know where I can find a replacement to this? Power supply info: type: Fortron/Source part no#: 4000989-1 model: FC135-40P Sincerely, Kuser
  8. kuser

    BUG6304 message in LD 43

    Option 11C
  9. kuser

    BUG6304 message in LD 43

    While attempting a backup in LD 43, ie, EDD command I got the following message that inhibited me from proceeding with my backup: BUG6304 APIF Security check failed the interface is already busy. Does anyone know what this is? Also, what needs to be done so I can proceed with my backup...
  10. kuser

    Directory command: Display and no display

    I know there's a directory command in ld 117 that identifies how many digital sets(eg, M2616 and M2008 telsets) that have been configured, as well as the telset part number, but was wondering if there's a directory command that identifies/inventories how many these digital sets have a lcd...
  11. kuser

    Call Pilot: Only Greeting no#2 comes on

    Working on a Call Pilot Voicemail sysem that utilizes Automated Attendant for 2 separate businesses where each business has their own greeting(ie, in this case greetings #1, #2) pointing to respective table numbers (#1,#2). Up until today it was working fine. However, now greeting no#2 only...
  12. kuser

    Recycle Bin

    I'm experiencing same problem as this user described. Recently, implemented AVG anit-virus was able to remove various virus files. After deleting a trojan virus file, it shows up in the recycler file. When I go into DOS to pull up the above file, I get the same message as this user described...
  13. kuser

    voice mail light not blinking

    Does anyone know what to do to get this message indicator light to turn on. I have a similar problem w/ a Series 3 pbx. It was working up to about 2 months ago. This is for an analog station. I've implemented option 1 for p15 in cmc 102. I've implemented option 1/yes for p4 in cmc 204. The...
  14. kuser

    fujitsu series 3 shows message but no message

    Besides being able to turn Message Waiting light on, ie, Dial 1#1 Dial 0 Hangup. In the same way, ie, from a telset, is there a way to turn it on? Sincerely, Kuser
  15. kuser

    CTD vs. UNR

    HUGWideBoy, Thanks for the prompt reply, I tried changing the option to CFF but to no avail. However, I should have mentioned to you the ERR404 msg I received during the fast busy responses. Fortunately, a tech support person provided me with the following problem/solving information...
See more

Part and Inventory Search

Back
Top