Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by kpari05
-
-
Ospf DR & BDR
hello, here's a sample output of the command "show ip ospf neibhbor detail" : Neighbor 10.139.24.254, interface address 10.135.16.1 In the area 0.0.10.1 via interface Serial0/0.1 Neighbor priority is 0, State is FULL, 6 state changes DR is 0.0.0.0 BDR is 0.0.0.0 Options is 0x52... -
Windows 98
Gentelmen, both of you. Thanks much I got thru..the poor thing[my pc] is already set to boot from cd-rom first....however now it isn't doing so . - its an old toshiba 460cdt that i wanna use to play with but I did succesfully enter the setup mode - I have another PC..live ..but will try to...- kpari05
- Post #7
- Forum: Microsoft: Windows
-
Windows 98
Smitee, I have a problem. What you said & that described on the link is familiar to me but i am unable to get thee, even on pressing "F2" during startup.....i get the following on my screen : MICROSOFT WINDOWS 98 STARTUP MENU: 1. Normal 2. Logged (\bootlog.txt) 3. Safe mode 4. Step-by-step...- kpari05
- Post #4
- Forum: Microsoft: Windows
-
Windows 98
Thanks smitee. Marry x-mas to you too & thanx for the answer. Really appreciated Let me check it out & I'll reply back here to see if this fixed the issue have a good weekend ! kpari05- kpari05
- Post #3
- Forum: Microsoft: Windows
-
cisco 2514 and cable modem
Firstly, check the duplex settings on the C2514...you probably have it set for 10M Full duplex...make sure the settings on the C2514 & your switch match. - From the description of your problem , it looks like a duplex mismatch that needs to be corrected on your switch. -
Windows 98
Hello all, I have windows 98 on a spare machine & last night I was trying to install linux..anyways the problem is that i wanted to go into setup to get windows to boot from the cd instead of the hard disk...i could not get that done & in the process of trying things...I restarted it in the...- kpari05
- Thread
- Replies: 6
- Forum: Microsoft: Windows
-
interface status
Thank you guys. I will post the interface stats in not too long. Appreciate you guys taking the time. regards, kpari05 -
interface status
If you have a T1 to internet lets say going thru a Cisco 1700 router and the link is down. The status on the serial interface is : serial0 is up, line protocol is down What exactly does this imply ? When the line protocol is down.....does it point to a Local issue at the customer site [like...
