Recent content by kmcintosh78

Ok, so I installed the CI card, but the MICS will not display IB CID until the line is picked up. What is going on? The MICS has a solid style software cartridge, with the following ID. NA-MICS 1.1 V12.3 I did order the 6.1 software, but the cartridge has no place to put it in. What am I missing?

Yeah, looks like I will be rebuilding as I do not have the fast rad. \

I back up to what? It is a simple set up. 10 extns, 7 pots lines and a simple CP100.

Thanks. Will the soft programming stay, or does this turn into a total rebuild?

Ok, its been a while since I upgraded a working MICS software version. Moving from 5.0 to 6.1 and replacing a DS card with a CLID card. Anything special need to be done? Other then power down, swap and power up?

So 6.0 will work for CID?

Is there such a thing as 6.0, or is it 6.1 for anything in the 6.X?

I know that I have to upgrade a current MICS from 5.0 to a higher level, but what is the lowest level that will support caller ID? Will 6.0? Thanks

I will have to check on the software level and cards. What are the trunk card model ID that I need to look for?

I have a personal customer that I am trying to wrap up the install of a used MICS, and I am having a hard time with getting CID to come up on IB calls to every set. Lines are POTS. What am I missing? All that they are getting is the ID of the individual line displayed on their sets. Thought I...

DTE worked. Done and done. Thank you all that helped. Thank you debug.

Great. I will check it out and go from there. Thanks for all the help.

Downloading it now. I run with a DTE cable everywhere. I use it to log into Adtran and cisco equipment. Hyperterm is my best friend

I don't know if wireshark would work on this. DHCP is not enabled from the IPO, unless the ARP caches can show the IP reply from the IPO.

I hope that is the case. I have been in the phone/telecom industry since 1995. Did it in the Air Force, did it as a contractor and now with a provider. I do the PBX stuff as a way to make extra money for my family and do admit I am sort of rusty on some things.