Recent content by kixtart

Yes, I have connected 2 remote sites (SOHO 6tc's) to my main site (FB700) and had to set an addtional tunnel between both SOHO6tc's. Now everyone can see every thing. Kixtart

I think the default license for BOVPN's is 10 on FB700's. This seems to be number 11 on your BOVPN list. Do you have enought licenses? Kixtart

If you have a Private IP, you'll run into a double NAT. Another router somewhere is placeing a wrapper on your packets, giving them a Public IP. I'd suggest using tracert to find out where and who, but I don't know what you can do from there. You'll need an un-NATted Public IP for VPN. kixtart

can you use telnet? Open a CMD box. Type Telnet xxx.xxx.xxx.xxx 80 and hit enter. The xxx.xxx... is your public IP. Also try port 25 for mail. Kixtart

Nice find! I ended up cheating. I relayed all outgoing email to my ISP's SMTP server. I always meant to go back and find out why, so thanks! kixtart

You may want to set it for Aggresive Mode (both devices). This is what I needed to do for a SOHO6tc to FB700III manual IPSEC tunnel. Kixtart

Open Policy Manager and "add a service". Find and add PPTP (or IPSEC depending on your needs). Hit Close. Back on the Policy Manager you should now see PPTP. Open PPTP and make sure Incoming is Enabled and Denied (unless you need to VPN into your network) and make sure Outgoing is Enabled...

Bingo! I had that happen and tracked it down to my laptop users having viruses. Go to www.trendmicro.com and hit the drop down to do a "Housecall" and scan your pc's. BNutz

How do you manually transfer FSMO roles? (Incase DCPROMO failes). This leads into my next quetion of, How successful is DCPROMO in transfering roles when demoting your first server in the forest?

This would take hours to tell you about. I'd suggest stoping by Borders Book store and picking up a Win2000 Server book. You need DHCP to hand out IP's, but you need to know all you component IP addresses to start with (not client machines obviously). If your Win2000 server is running active...

Hi jenlion, So what your saying is that having ipsec_users conflicted with dvcp_net in the "ANY" service? I am having a similar problem and am searching high and low. BNutz

The title was supposed to be "Help setting up BOVPN (FB 700 v7 to 6tc v6.2.20)" I looked and found v6.3 for the SOHO 6 that was just released, but it doesn't address my problem with BOVPN. I will upgrade because it addresses other issues I have with MUVPN and Max Internet sessions...

I have read and read. I can ping from FB 700 to SOHO 6tc and servers behind it, but cannot open a share (\\10.0.1.15\c$ or anything else). I cannot ping or open a share to the FB 700 or behind it. I setup Manual VPN, just like their doc says. I made sure all HASH's are identical. Here is...

IT WORKS! Ok, first I brought my DNS internally. NO go. Still can't send to AOL.com and Comcast.net. But at least I have far more control over DNS now. Sohni, YOU ARE THE MAN! [thumbsup2] Your last post explaining how to use my ISP SMTP as a smart host worked like a champ! For all who...

I know me, I'm sure I will still try it. I'll let you know. But I'll take a break as I will be away for a few days, then check back in. Gary [noevil]