Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by kfisher33

  1. kfisher33

    IP Office embedded voicemail

    I have a customer on an IP Office 406 and running 5.0.8. Has anyone heard of an issue on the embedded voicemail Dial by Name not hearing the prompts. We uploaded the new prompts and when you dial 1 you still get nothing?????
  2. kfisher33

    Avaya Prologix

    So, the 747 card won't support caller id name and number ?
  3. kfisher33

    Avaya Prologix

    will the definity G3V6i.02.120.5 supports caller I'd name and number on analog trunks.The CO cards are TN747B V8.
  4. kfisher33

    Can't Dial out on PRI, Can receive calls

    It is fixed, I finally got ahold of the service provider, once they figured who owned the circuit and found there was only 16 channels instead of 23. All is good. Thanks for all your input!!
  5. kfisher33

    Can't Dial out on PRI, Can receive calls

    it is coming from a smart jack
  6. kfisher33

    Can't Dial out on PRI, Can receive calls

    On the incoming calls, it shows connected. On the out bound, I can see when I dial the timer on channel 23 reset from an idle state and start counting, but the channel continues to show idle.
  7. kfisher33

    Can't Dial out on PRI, Can receive calls

    yes, the ARS is set to 0
  8. kfisher33

    Can't Dial out on PRI, Can receive calls

    I changed the line group and channels back to 0
  9. kfisher33

    Can't Dial out on PRI, Can receive calls

    Yes, I am thinking this is relevent myself and also, I am getting a - cause 100 Target: Short_Code: 1N; - Line_Group_ID: 5 has been set to: CMARS_OUTOFSERVICE_ALL
  10. kfisher33

    Can't Dial out on PRI, Can receive calls

    I try changing my PRI channels to line group 5,, I changed from 0 to 5, does the same thing. I defaulted the switch yesterday and still couldn't dial out. I think it is something to do with the provider. But the circuit will work on the old nortel.
  11. kfisher33

    Can't Dial out on PRI, Can receive calls

    Anyone Ever Seen This ? 394958mS RES: Tue 22/9/2009 06:58:24 FreeMem=76972252(1) CMMsg=4 (4) Buff=200 964 999 7430 5 Links=20715 394958mS RES2: RTEngine=0, CMRTEngine=0, Timer=43, Poll=0, Ready=0, CMReady=0, CMQueue=0, VPNNQueue=0 396275mS CMCallEvt: 0.1018.0 -1 BaseEP: NEW...
  12. kfisher33

    SoftConsole

    Does anyone know if you can use Dial Intercom on the Soft Console and how would you use it?
See more

Part and Inventory Search

Back
Top