Recent content by kevmullet

Hi The scenario is I have a customer with an MPLS network. At one site there is an internet breakout with an ASA on the end of it. The ASA is aware of all the remote MPLS networks. I am trying to create a LAN to LAN VPN into the ASA from the internet and provide access to one of the remote...

That sounds like it will do the trick. I shall try tomorrow and see. Didnt think of that, make sense though...

OK so this is an experiment. I have 2 ASA's. One that terminates my Internet connection at my office. On this I have setup a RADIUS auth for device access to a server running AD and NPS and this works fine. The second ASA is at a customers premises and what I am trying to do is to use the...

Terminating on an ADSL WIC in the 2800

Hi, I am wondering if this is possible, and I have a feeling that the answer is no, but its worth a shot. We have recently moved premises and been given an ADSL connection with just a single static public IP address. I have got the 2800 up and running on this connection fine, but we have a...

Yeah because of this line access-list 102 extended permit icmp any any you are implicitly denying anything else into your external interface just add an ace allowing 4242 inbound.

Hi Guys, I am still having this issue, the current config is below. I have added the nat-traversal lines. Strangely I am able to ping 4 IPs on the internal network, which belong to an IP phone system, but only these, they are not different in anyway and everything on the internal network has...

Cheers, I have been looking around and added the crypto isakmp nat-traversal command to no avail. I prefer to have the VPN pool within the network range, I know this is possible as I have done it in the past, but have no idea why traffic is not passing. Thanks

Further to this the tunnel in use is called RemoteAccess

OK, have configured a remote access VPN and it connects OK and the split tunnel works OK, but no data is passed between the remote site and the LAN I followed this walk through on creating it: http://www.cisco.com/en/US/docs/security/asa/asa80/getting_started/asa5500/quick/guide/remvpn.html...

Is this an internal or external call?

Do you have the Wizard feature in your programming? Remember to program a 10 virtual ports via handset programming in 10-42-01

Hi, We have MS CRM3.0 running and the guy who looked after it left the company. Before leaving he has disabled a couple of users. This may sound like a stupid question but how do I enable them again? Thanks in advance

Hi, Pretty new to SNMP, the situation I have is a network of cisco catalyst 2950 switches, which I would like to know if a cable is disconnected from any of these. Is it possible to use SNMP to report when a connection is lost on a port? And what software would you advise to do this? Cheers

Oh and I clearly meant lose connection.....!