Recent content by kevint21

Hello - i have a server which sits in the dmz. Some users can connect to it and some are getting page not displayed. It looks from the firewall that users who connect successfully stay in vlan 1 as they go through the corporate network, through the firewall and into the dmz and back again...

Hello, i have 2 ACS servers (1 primary, 1 secondary). The primary writes full backup to secondary every hour. But now i have moved the secondary onto the dmz the primary can no longer see it. It can ping it, as i have allowed it through the ASDM firewall. Q What port should i enable so that...

I have 2 servers. Server 1 is setup with ACS (Tacacs)4.0 and Cryptocard software. Server is the backup and gets replicated with the same data from server 1 every 60 mins. So i have replication already setup. I want to be able to unplug server 1 to fail it and then server 2 will be the...

Hello, i would like to compare a running config against the last backup config. I can do this manually using Kiwi Cat tools with the compare function. But is their a way of having some sort of automatic process where i can compare any changes to a router to with the last backup. Does any...

Does anyone know where i can get a 100% working download of syslogng. I have tried about 6 downloads and they all seem to be having a problem somewhere. Is their a straight forward way of installing this. I seem to run into walls everytime.

Hello, i have setup a linux pc in work with Fedora Core 8. Does anyone know of free LINUX Syslog server software and Netflow server software so that i can view logs/data from our switched and routers on the network?

Found the solution to this. Go to Packard Bell site and download the drivers for the windows 98 keyboard and mice.

The problem is he has a bit of an attitude problem. Although as a telecomms technician i should really just knock him off the network or shut his port down.

Smah, i had a go at this but it must be because of the firewall or something. It wont let me do it. Do i need to open a port for ftp on this rule on the firewall. Would that help? What i do is start the laptop and connect to the VPN with a 3G card. When i get a connection, i then connect to...

The mail server is configured by our exchange administrator to only allow 1 account on your pc. He wont budge on this. But he has created a seperate 'faults' account to use. Maybe i just need to set it up on a seperate machine. Thanks anyway.

I have setup remote access to our network for a few clients using a vpn into our firewall. They connect successfully and then they can remote desktop ok onto the servers i have allowed them to view. One user needs to copy a few files of one of these servers, amend it on his laptop and then...

I want to send a mass mailer to about 150 people in work. I have a seperate 'faults' inbox account i want to use so i dont get all their replys to my own personal email address. I want the replys to come to this seperate 'faults' inbox account. It is ok getting the replys, but how can i send...

I have tried another keyboard and its just the same. Both keyboards work fine on other pcs. I take it if its a short on the motherboard then it means a new motherboard.

I have an older pc that i still wish to use. It was originally windows 98. Its a packard bell club 77. The problem i'm getting is the pc wont boot up saying KB / interface error. Even if it does boot up your cant do anything because you have no access to keyboard or mouse. Checks: i know...

What is a good default setup for Cisco Switches in a Corporate LAN? At the moment i use the following lines below but i would like to add in some more commands to reduce broadcast traffic or anything else not needed. Anything to enhance network performance. switchport mode access switchport...