Recent content by Kellye

Hi all Hopefully there is someone out there that has been around long enough to help me out with this.. I am doing some work for a friend..and they still use an old style 5-1/4 floppy drive as well as a 3-1/4 drive.. I am trying to set up the system with both drives however it wont run stable. I...

I am hoping someone here may have an answer to this question. I had a client contact me and he has an old Apple 2e..no hard drive .it uses the old 5 1/4 floppies. He has just aquired a new powermac and he wants to transfer the stuff on his old apple 2e to his new mac... I was thinking to just...

i did just that..I found a special driver for this board and it works just fine.. thanks for your imput Kellye

Hi All, again I am coming to you all for some help..UGH... I am building a system with an asus a7a266 board, 1.4 athlon,512 mg crucial ram, and an ATI rage pro 32mg video card. This is my problem..When I load the drivers for the video card the system will not boot to the OS..it simply hangs at a...

well i solved the problem.... guess what it was.... I had some ram in this system that it didnt like.. when I removed that ram it went fine.. I would have never thought that was the problem but indeed it sure was thanks for all of your suggestion! Kellye

Mike, I believe you may be right..there is no jumpers on either the drive or the adapter that is necessary to connect to the adaptec card using this cable that was provided.I have a feeling that I need to jumper this adapter.... your suggestions are greatly appreciated.. and I thank you for...

Testnode, here are some answers to your ?s You have formatted the drive how? I formatted the drive fat32 with no partitions. the drive is a 9.1 gig ibm dmvs You are loading the SCSI BIOS? scsi bios loads very slow and then gives me a message that scsi bios configured correctly... You have...

(continued) oops i shoulve mentioned that this problem is on another system I am building..it has nothing to do with the earlier post regarding the password issue thanks again!

ok here goes.. I am building a computer with an 8 gig IBM scsi hard drive and and adaptec 2940UW scsi controller.The motherboard is an asus cuvx-d with two 933 processors on it. I have the the hp tape back up disconnected for now..this is my problem.. when I am in the process of installing...

thanks for your responses wanted to let you all know i ended up fixing the problem by formatting and reinstalling the os... thanks again for your comments & suggestions Kellye

Let me thank all of you with your great responses to my dilema. I ended up going to the clients office today and reformatting the drive and reinstalling everything all over. It took forever but I guess in the long run its worth it because I don't have to deal with it anymore LoL..btw the client...

Bong.. thanks for your response..Thats what I was afraid of..lol appreciate the imput.. Kellye

Greetings, I was wondering if anyone out there could help me with a problem I encountered today. I was setting up a little peer to peer network for a customer. His number one computer he wants to keep using as the primary is running win98,the second one is running win 2000 pro. I checked the box...

Greetings, I was wondering if anyone out there could help me with a problem I encountered today. I was setting up a little peer to peer network for a customer. His number one computer he wants to keep using as the primary is running win98,the second one is running win 2000 pro. I checked the box...

John..I have them networked successfully, there was really nothing I had to do special that I can remember..If you want me to check and post my settings I can do that..let me know.. Kellye