Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by kduplooy

  1. kduplooy

    New MICS with Call Pilot 150 - Won't Start

    Thank you for all the responses. Unfortunately there has been no improvement. As I Mentioned in the 1st post, I had tried to monitor the boot process and log in with a serial cable using hyperterminal set to (9600 baud, 8-N-1), but only receiveed unrecognizable output. The PCMCIA Card is in...
  2. kduplooy

    New MICS with Call Pilot 150 - Won't Start

    AT this point I can't think of a good reason either! I think that's what caused my problem..(Hind sight) Now I just want to get back where I started! ( Or my Mommy!)
  3. kduplooy

    New MICS with Call Pilot 150 - Won't Start

    Curlycord, I have tried the methods on the link you sent, the system is not rebooting, it boots, Lights flash, they stop, No Lights. During this time I have tried to connect with serial cable via hyperterminal, but can't read the out put. That's why I am asking for help configuring...
  4. kduplooy

    New MICS with Call Pilot 150 - Won't Start

    Can anyone tell me how to configure hyperterminal settings to be able to read the bootup info correctly?
  5. kduplooy

    New MICS with Call Pilot 150 - Won't Start

    No lights will stay on. It seems to go through a boot process and then all lights go out.
  6. kduplooy

    New MICS with Call Pilot 150 - Won't Start

    I connected the phone to the VM Ports and They are working.
  7. kduplooy

    New MICS with Call Pilot 150 - Won't Start

    How do I do That??
  8. kduplooy

    New MICS with Call Pilot 150 - Won't Start

    I accessed the web based management, and tried to give the call pilot a new IP address, I entered the local gateway address and the DNS server, which is across a permenant VPN on a different subnet. I received an error message stating that I had to give it a FQDN if DNS was used. I gave it a...
See more

Part and Inventory Search

Back
Top