Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by kcmap

  1. kcmap

    Shared SMTP domain name

    My current system is W2K with exchange 5.5 sp3, new system is W2k with Exchange 2000. Question: I'd like to share the SMTP name space and have the 5.5 system forward mail to the new ssytem, if the user doesn't exist on the 5.5 system. User1@company.com ...if found on the 5.5 system, deliver...
  2. kcmap

    Arcserve 7 - E6959- Netware

    NWtape.cdm removed, system restarted, one backup completed without failure. ...we'll see if the process goes better on Monday night (GFS) Thanks XENOTEC
  3. kcmap

    Arcserve 7 - E6959- Netware

    Thanks for the reply. No NWtape...interesting, I'll check that out. Nothing but files in the config.sys Nothing in autoexec but the server.exe, etc, no CD-rom stuff. As a side note, the darn tape eject button on the drive has failed...if the drive is bad (marginal and failing), that would...
  4. kcmap

    Arcserve 7 - E6959- Netware

    Thanks for the posts... Single AIT-50 Tape drive is on it's own controller, it's been running fine for over a year, until this error started happening. I think the problem might be comming from cpqshd (nwpa driver?), or the drive itself. It only stops responding on a GFS day and after it's...
  5. kcmap

    Arcserve 7 - E6959- Netware

    Server Netware 5.1 SP4 Compaq DL530 CPQ AIT -50 tape drive ArcServe 7 patched. I get this error "E6959 Unknown HACB error" in the tapeserver log, part way through a backup session. The first few volumes backup fine, then the error starts occuring. CA says this is not their problem...
  6. kcmap

    Arcserve 7 - E6959- Netware

    Server Netware 5.1 SP4 Compaq DL530 CPQ AIT -50 tape drive ArcServe 7 patched. I get this error "E6959 Unknown HACB error" in the tapeserver log, part way through a backup session. The first few volumes backup fine, then the error starts occuring. CA says this is not their problem...

Part and Inventory Search

Back
Top