Recent content by jwgrahamjr

I am running NW6 SP5 - 10 user license. My server is built around an Asus server mobo with single Pentium4 2.53Ghz processor, 1GB of ram and gigabit ethernet on the motherboard...RAID-1 with two 10,000RPM Seagate SCSI drives (U320). The server's gigabit ethernet is connected to the gigabit...

I have NSS volumes. Portlock Storage Manager seems to be a nice product - I downloaded the eval version...tried it and liked it...so I will be getting the license this week. Thanks for the tip.

I would like to put faster hard drives & controller in my server - I currently have an Adaptec 2100s U160 card and some very old Fuji SCSI hard drives in RAID 1 configuration...I would like to boost disk I/O performance a bit by adding a U320 card and 15000rpm drives. I am using Netware 6 SBE -...

rjs, I tried the timeout parameter and got the same problem...it is a single job. Your other suggestion is exactly what I needed ... I simply put in a line to capture the printer and sent control characters to the printer to tell it to print 2 copies of everything. I then used spool with the...

Background info: Novell 6SP3, clients are using DOS applications in Win98 to print various hardcopy reports. These DOS applications have hardcoded CAPTURE, NPRINT and SPOOL commands in them. Problem (with example): The software (I have the source code) issues the following command...

Yes, I am currently running NW6 and NW3.12 servers and able to log into both of them simultaneously from Win98SE workstations using the latest client with either IPX or TCP/IP. You shouldn't have any problems trying to do this.

The Linksys card did not come with the Dell - this is something I swapped out to upgrade from the standard 3COM 10/100Mbit to 1000Mbit. I'll double check the drivers - I just checked Linksys and they still have the same driver set on their website that shipped with the card. I should also point...

terry712 - It is a dell poweredge 600 model with 2.53Ghz P4, 1GB DDR, linksys EG1032 nic (using the drivers that came with the card), adaptec 2100s raid adapter w/raid 1 using updated adaptec drivers, 2 seagate cheetah's in their own cooling bays (18gb each). I have not tried the...

I have NW6 w/SP3 and all the latest patches. After I installed SP3 my server consistently locks up when issuing a "restart server" or "down". It usually hangs after all the volumes are dismounted. CTRL+ALT+ESC does not work and I always have to resort to non-graceful power...

Has anyone successfully used the Linksys EG1064 or EG1032 gigabit server adapter with Netware 6? I notice that it only ships with NW5 drivers. Thanks, John

First, basically anything that could have gone wrong went wrong with my migration. It was not an easy migration! I assume you are migrating to new hardware. 1. you need to have some version of DOS installed as a "base OS". NW6 comes with a version of Caldera Dr. DOS which would be...

Thanks for the tip, I copied ConsoleOne to the workstation and everything is fine now. John

BTW, Server is running NW6 SP2, ConsoleOne v1.3.3

I am trying to run ConsoleOne from a workstation using a mapped drive. I am running the consoleone executable that resides on the server. The splash screen appears and it takes almost 15 minutes for ConsoleOne to load. Once it finally loads, everything runs at normal speed. ConsoleOne loads...

Thanks, your suggestion worked...actually I had two problems. I had used NWADMIN32 to set up forms but they weren't being recognized by capture. It turns out that I must have migrated the old capture.exe from my NW3.12 server to a search drive...because I was using the wrong version of capture...