Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by justsomeguy

  1. justsomeguy

    OS Reboot Doesn't Reboot

    About 6 months ago, I built a system with the following key components: 1400/266 AMD T-Bird processor DFI AK76-SN REV A Motherboard It is dual boot, Red Hat 7.3 and Windows 2K. Any time I try to issue a reboot command, from either OS, the system goes through the shutdown and essentially...
  2. justsomeguy

    AMD 1400 - DFI AK76-SN System Problem - PLEASE HELP!!!

    Sorry I never replied back, but your response was absolutely correct. I tried a different case and power supply to no avail. I swapped the memory to non-parity, and voila! Shortly after that, DFI posted the error on their site. Thanks for the help.
  3. justsomeguy

    AMD 1400 - DFI AK76-SN System Problem - PLEASE HELP!!!

    OK, let me try to be as brief as I can. But, to give you all of the details, I'm not sure that is possible, so here we go: In my research to build a new system, I wanted to make sure that I only used approved AMD parts. I wanted AMD chipsets, everything. So, during my initial investigation...
  4. justsomeguy

    Goto Record in Select Expert?

    Here is the situation. I have a report with two different tables attached. I'm trying to get one field to determine which records will show up, which the way it is in the field/table will be the "last record". How do I use select expert or select records to do this. Specifically, what...
See more

Part and Inventory Search

Back
Top