Recent content by just4free

Hi guys, glad to come back again. I have Avaya CM52 and Veremark CAS, now the CDR is able to capture the ANI (10-digit caller number) and the extension (7-digit agent login id) for the inbound calls, however, I am wondering if it is possible to have CDR to get additional DNIS (10-digit) too...

Thank you all for the help. GHTROUT's post about EES is the fix for my problem. Have a nice day...

Thanks for the info. Nortellian.

It's not a meridian mail, it's a Octel box linked to Nortel PBX.

Sorry, I am not quite understand it. Create an ACD "2" to point to 6789?

Our PBX is Nortel 61c and Voice mail is Octel 250. The access number to voice mail is 6789. The switch console is 2250. There are two groups of subscribers in the voice mail system, 2### and 6###, while the 6### user has corresponding extension on the PBX and 2### doesn't. So when incoming...

The # button is working. Ken, Thank you so much for the time and information. Have a great day!

Hi Ken Means, Thank you for the reply. I tried to login to the type 1 mailbox. The option I have is Review the messages by entering '1'. There are 3 messages in it and what I want to delete is the last two. But I was stopped at the first one as the only option there is "Delete the message by...

In a Octel 250, one listen-only mailbox is improperly set to the wrong COS so someone left 2 other messages in that mailbox right after the office announcement message. I checked the contributer list, there is none. I wonder if there is anyway to erase those two messages while keep the first...

That's why. I did exactly what you suggest and it worked fine. The reason I want to make the most of octel system is there are over 20 external numbers need to be transferred in my project. It would be much easier and cheaper with type 32 & 34 mailboxes. If 250 can't, the only way to do it is to...

There are two FLT cards installed, with 8 port on each. emulate totally 16 X M2616. The model # is 044-2541-001. Any place else I can tell the card type? Thanks.

Nothing but a single click, 10 seconds before the call dropped, everytime. No matter what the transfer sequence is.

It has the same situation, after 53 second, the call dropped.

Thanks, KenMeans. The trick works.

Hi KenMeans, I tried #, but it is not allowed to enter at the end of the number. The change in the menu 6 for transfer sequence has no luck. The call is dropped after 53 second regardless of the combination of the sequence.