Recent content by june03

to get to internet, site A RTR2 has to go extra hop via Site C RTR 1, then to Site A RTR2 and off to internet. RTR1 in site A only has to hit RTR1 in site B then off to internet. Since all the routers behind site A RTR1 & RTR 2 are taking the router via RTR1 due to shortest path, Last night i...

Diagram is just showing 3 sites connecting. We have several sites. Look at the attached link, picture towards the end on the right side. several customers, CPE connect to a few cisco UBR1000 routers, who then connect to Cisco GSR's at their respected site, example site A & Site C. Cisco...

Hi, We have the following setup, all OC48 links: Site A RTR1 ---- Site B RTR1 ---- Level 3 Site A RTR2 ---- Site C RTR1 ---- Site A RTR2 ---- Level 3 Currently, link between Site A RTR1 to Site B RTR1 is saturated. Site A RTR2 to Site C RTR1 does not have much traffic on it. Would...

Here is the situation. - Site-to-Site VPN is setup from company A to company B - Company A needs to setup Site-to-Site VPN to Company C as well. - Company B & C will not have access to each other. - Equipment used, Cisco 1710 (2 interfaces). Internal interface on Cisco is 192.168.2.***...

you have to setup NAT or PAT. june03

Alot of companies use NAT. See the link below to help u get started. http://www.cisco.com/warp/public/110/19.html june03

thank u, it worked. june03

subnet mask are all 255.255.255.0 for both networks. I have switches on both sides, but there arent setup to do anything. june03

*PIX = 10.0.1.254(inside interface) & a static route to 192.168.1.0 network via 10.0.1.250 *2nd PC = 10.0.1.1 & gateway is 10.0.1.254. I added a static route to 192.168.1.0 network via 10.0.1.250 *Router = 10.0.1.250(outside Interface) & 192.168.1.254(inside Interface) *1st PC = 192.168.1.1...

thank you for your advice. I will be purchasing a used router via ebay. june03

My home lab consist of the following: cisco 827--------Pix 501---------Catalyst 2900 I was looking at the following routers: cisco 2611 w/ 1 T1 card cisco 2621 w/ 1 T1 card What i want my setup to be is: cisco 827--------Pix 501---------cisco 2600-------Catalyst 2900 I want to be able to...

My home lab consist of the following: cisco 827--------Pix 501---------Catalyst 2900 I was looking at the following routers: cisco 2611 w/ 1 T1 card cisco 2621 w/ 1 T1 card What i want my setup to be is: cisco 827--------Pix 501---------cisco 2600-------Catalyst 2900 I want to be able to...

I've tried it only behind the router, i get connected, but cant access or ping anything. Thank u for your help. I'll keep working at it and when i find a solution i will let u know. thank u again... june03

Hi, im trying to configure a cisco 827 without nat, however i can only ping from the router to the internet, i cannot access the internet from my pc. Do i need to setup a access-list? if so apply to which interface? thanks june03

It's my router. I have a Cisco 827 router as well as a Pix. Do i still need help from my ISP? I know VPN works with my Netgear rt311. thanks june03