Recent content by juldal

Hi, anyone know if a serial adapter on an Optiset E phone that gathers the CDR information from a HiPath 3800 V7 will still work if upgraded to version 9 ?? kind regards JT

There is very little information on to what the error consists off. The system is on a TriMod 20 UPS system There is no battery pack in the 3800 only the 3rd LUNA as a redundant psu maybe the UPS system makes some sort of selftest, but i my perspective, the UPS system is designed to allways...

Hi, on HiPath 3800 V9 I get a lot of alarms on !Alarm power on and !Alarm power off h150eErrorDescription.1 = ErrorClass: 21; Number 28; Error class 21 number 28 is described as: 21-028 !Power Alarm on Emergency battery operation due to power outage. Check line voltage. Note...

You were right it was set to COS 2 I have set all the channels, and the announcements to COS 7 where there is no restrictions. But nothing changed, it still says it is not able to call the number.. the destination is set to external, and the trunk access code is set

Hi, I have connected old type wired headsets to the OS40HFA phones, this was sennheiser headsets, and Sennheiser actually have an RJ11 to RJ45 adapter that solved the problem for me :-) /J.U.T

Hi, on Xpressions Compact V3 I have on a night mailboks set an external destination on the intercept position of the short dial menu. When I call the DDI the system plays the night message, then tells me there cant be made any connection to my called party. The External destination, is set...

I actually ended up using an Avaya box for an ACM. this also works. The Avaya box was on stock and was cheap. /j.u.t

hmm no i didnt connect any transformer, or capacitor, og resistor 600 ohm, i just connected the jack directly to the POT port. 2 questions If a 600 ohm resistor i required, does siemens provide this? can an RJ45 to jack converter be bought anywhere?

Hello I recently put an MP3 player on an analog port of the hipath 3800 V8. however, the music played is going up and down in volume. actually it seems like the music played "falls out" every now and then. from a mobile, when silence comes, there is much noise on the line. but between two...

Hi We have a Gigaset DX800A bought as a backup for a PBX. The phone should be connected directly to the ISDN line, if the PBX fails. But does this phone only support Point to multipoint lines, og also Point to Point lines (no msn´s)?? I cant seem to seize a line, the lines are Point to...

unfortunatly the documentation is not adequate. some things is just not described very well. but I now got it to work with the help of a collegue. It turns out that the webserver is its own (apache or something else?) it acutally doesnt use the IIS, only for the web client like Ipad or...

Hello The IIS is running, however it is empty? it only has the default sites. This makes me think that OpenScape Web collaboration uses its own web server, installed on a SQLExpr 2005. I can Ping Localhost, but I get an answer from the IPv6 address? If I delete the IPv6 address from the HOSTS...

Hi what is the siemens platform, hipath 3000? /juldal

Hello A new installation of openscape web collaboration on an win 2008 R2 server, on VMware. The server is in a DMZ From the server itself, i get a 404 error on http://localhost/admin And my invite links also doesnt work? If I download the client.exe from siemens web, then it works fine...

I just want to reset the 30 days trial licenses in the CLA/CLM I am not interested in gaining access to licenses without buying them. But I have a test scenario, that I use for testing software and so on, with a HiPath 3800 That I just reset every 30 days. But my License Agent, regocnizes the...