Recent content by jsavely

The best way to accomplish this feat is the make sure you have a good backup. Also backup your raid configuration. Replace all your drives with the new ones, configure the new array, load the OS and restore the data from backup. I am not sure that replacing the drives 1 at a time and letting...

I would go with the Raid-5. Raid level 0 will give you more space, but you have no redundancy, That is if a drive should fail you will lose data on Raid-0. Thus taking your operating system down. Remember you must have at least 3 physical drives or more for Raid-5

I had the same issue. Fought with it for weeks. Replaced the adaptec scsi driver with an older version. (ver. 4.2 Dated 2-21-2001) My throughput went from 30mb/min up to 850mb/min on my faster clients and 350mb/min on my slowest client machine. Adaptec 29160 scsi adapter. The driver I used...

<br> We did get some info. on this.<br> The plan is to put GW Webaccess on a seperate server<br> outside the pix. With groupwise running inside.<br> Using the pix mailguard option, then open port 25 SMTP<br> to the Groupwise server.<br> <br> Any more suggestions would help.<br> Thanks for taking...

We have recently purchased a pix firewall and would like to see a sample configuration from someone<br> that has implemented this product.<br> We are basically a novell shop and use groupwise 5.5 for e-mail.<br> We would like to have the e-mail server on the inside of the firewall.<br> We also...