Recent content by jrcanfer

Sorted it - I'd put a typo into a route on the PIX! Thanks for the help!

If I do a "show ip route connected" I get all three VLAN's listed. I'm a little lost with regards to creating the layer 3 SVI for VLAN 2 though. I've been through Cisco's technical docs online and while they touch on SVI's they seem to stop short of going into any detail. Thanks

Chipk, with a host connected to a port on the 3560 which was configured for VLAN 2 and switchport mode access I could ping servers on the 3560G in VLAN1 and vice versa. The host was configured with a static IP for purposes of the test. I could also do DNS lookups from the host in VLAN 2 to...

Hi, Configs as below although I've pulled any changes I made to ports for VLAN 2 as it wasn't working; 3560G; ! ! Last configuration change at 12:35:56 UTC Fri Apr 20 2007 ! NVRAM config last updated at 12:35:57 UTC Fri Apr 20 2007 ! version 12.2 no service pad service timestamps debug...

I'm very new to Catalyst switches and we've just taken over support of our switches from a third party. We've got three 3560's and a 3560G with two VLAN's configured. One is the default for our Windows domain and the second is configured for our IP phones (VLAN5). I'm trying to add a second...

Right, I've been running Pixes for years but never had to setup a Site to Site VPN. I can work most of it out, but I'm somewhat confused about what I'd need to put into the config to achieve the following Phase 1:Encryption: DES Hash: SHA1 Lifetime 86400 seconds...

Here's the config, thanks; : Saved : Written by enable_15 at 13:48:59.752 UTC Wed Sep 13 2006 PIX Version 6.3(4) interface ethernet0 auto interface ethernet1 10baset interface ethernet2 100full nameif ethernet0 outside security0 nameif ethernet1 inside security100 nameif ethernet2 dmz1...

Thanks for the pointers, I've inherited the config of this Firewall from a third party company that used to administer it before I joined the company. We are indeed using a split-tunnel; vpngroup DIALINVPN split-tunnel 100 The ACL's that govern the tunnel are; access-list 100 permit ip...

Hi, Hopefully this will be a nice easy question for someone to answer....I have a PIX 515E runing PIXOS 6.3, supporting a DMZ and IPSEC VPN. When a VPN client connects they are assigned an address for the 192.168.1.0 /24 subnet and can access the internal 192.168.168.0 /24 subnet. Internal...

Hi, I've got a bit of an odd one, in Outlook all but one public folder has become invisible to the user; the Offline address book has become corrupt (when you try to view the properties in ESM it gives a proxy error, refuses to show any email tabs and then opens to give you the other tabs); and...

Success! Disabling the removable storage service alone was not enough to get Win Installer etc running on my servers again. So in safe mode I disabled the Symantec AV EE, HP Insight agent, BENT v9 agent and the APC PBE agent services and on rebooting into normal mode I had my servers back...

Well it's definitely Windows Update related and the only common patches on the servers I have found that are affected are the BITS 2.0, Win Installer 3.1 and KB893066. Once the problem kicks in there is no way of deploying patches manually or through SUS that I can find. However, on one...

I've just had the same error occur on three critical infrastructure servers. Oddly things like SQL and Sage continue to run unaffected, but all the services refuse to start or stop. Why it suddenly occurred I don't know for sure but I suspect a Hotfix. I've checked all the default NTFS...

Despite Cisco's assurances that connecting a WPA2 enabled Cisco 1200 access point running AES encryption to our wired LAN is safe, I'm seeking some third party assurance! While putting the wireless LAN into a DMZ and making corp users VPN into the wired LAN is belt and braces, I'd rather that...

I need to retire an old win2k server which is our Enterprise Root CA. The rest of our core infrastructure is moving over to Win2003 or already is Win2003. Is there any way of making one of our Win2003 Servers the Enterprise Root CA - i.e. moving the role across to it without totally screwing...