Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by jpresco

  1. jpresco

    BCM50e Router Configuration

    YOu have to set the BCM g/w to the BCMrouter IP and the BCM Router is the next hop out of the network which is the Cisco router. I was able to get this to work by turning off the firewall within the BCM Router. Thanks!
  2. jpresco

    BCM50e Router Configuration

    I am trying to set up the routing on my BCM50e(release3). WAN port settings: 172.134.189.200/16 Remote IP 172.134.0.1 LAN port settings: 192.168.18.130/28 My BCM is 192.168.18.131/28 g/w - 192.168.18.130 Static Routes: default = 0.0.0.0 g/w 172.134.0.1 (I would like to change this from...
  3. jpresco

    Set Do Not Disturb on an analog set within a Hunt Group

    I have several members in a rotary Hunt Group programmed on a BCM450 5.0. I want some users to be able to place their set in DND mode. I can do this with a digital set in the HG, however the DND feature does not appear to work with an analog set.
See more

Part and Inventory Search

Back
Top