Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by jonnybb1

  1. jonnybb1

    Removing Networked Magix w/Amanda VM Howto?

    Yes, I'll be using WINSPM on site... Thanx a bunch! John Berry, Owner Lantex Voice & Data Systems San Diego, Ca Business Telephones, Cabling, VOIP, Access Control, and more! http://www.lantex.com
  2. jonnybb1

    Removing Networked Magix w/Amanda VM Howto?

    I've got two Networked Magix connected via a T1 PTP circuit, and they share one Amanda 8 port Windows Voice Mail which is connected to one Analog Card. We are replacing the Magix that has the Amanda VM with a Cisco solution. Now I need to move the Amanda to the other location that still has the...
  3. jonnybb1

    NCP500 Delayed Ringing On Analogue Trunks

    Also we are finding out that Verizon and Alltel have had issues on their Centrex lines. Caller will dial the number, caller hears 2 ring-back tones b4 the phone actually starts ringing, on top of that the Panasonic will light up the line-light on the phone before the phone rings (due to the...
  4. jonnybb1

    Magix 6.0 Howto Program Carrier Access codes?

    Sorry BTW, YES it's a plain ole vanilla T1 with no Caller ID in service for 15+ years with no changes... Thanx a bunch! John Berry, Owner Lantex Voice & Data Systems San Diego, Ca Business Telephones, Cabling, VOIP, Access Control, and more! http://www.lantex.com
  5. jonnybb1

    Magix 6.0 Howto Program Carrier Access codes?

    Not to be too lazy/stupid myself, in WSPM what are the menu items I'm looking to drill down to? What do you suggest I raise the FRL to? I think the pause is slight (200 ms?), maybe adding a digit might do the trick if I need to... Thanx a bunch! John Berry, Owner Lantex Voice & Data Systems...
  6. jonnybb1

    Magix 6.0 Howto Program Carrier Access codes?

    Ok, I thought it was a version 6, I must be wrong. I cannot access it remotely. BTW, it's a T1 trunk with 24 channels... However, How does the Legend or Magix handle carrier access codes when dialing a particular number? Doesn't the Merlin Magix have ARS? Thanx a bunch! John Berry, Owner...
  7. jonnybb1

    Magix 6.0 Howto Program Carrier Access codes?

    I have a Merlin Magix 6.0 with T1 and 30 4400series phones, and 16 analog stations. Recently just had Paetec require a PIN code for LD calls. Now we want the PIN codes removed from the fax machine extensions. Can someone please let me know how to program ARS (auto route selection) for...
  8. jonnybb1

    Forward Analog extension to another extension

    I want to forward extension 685 on one Merlin Magix to an extension (186) on a networked Magix at different location. Could anyone tell me the best procedure to forwarding analog extensions (on a OTR016)? Thanx a bunch! John Berry, Owner Lantex Voice & Data Systems San Diego, Ca Business...
  9. jonnybb1

    TA-824 & Disa Card

    Not to be rude in all of this, but it would be much easier to get a TDA50 with a TVA50. You now have a real office phone system. The 824 was designed more for the home and very small offices with limited requirements for a phone system. Just my 2c worth. Thanx a bunch! John Berry, Owner...
  10. jonnybb1

    TVA200 message retention

    I agree with TelecomAvatar, make sure you have the latest version, and since you have the retention set at 5 days, I would wait 7 to be sure the deleted mssgs are actually cleared. Thanx a bunch! John Berry, Owner Lantex Voice & Data Systems San Diego, Ca Business Telephones, Cabling, VOIP...
  11. jonnybb1

    KXTDA30 Lift to answer

    On the TDA's (USA versions) you can set the ringing preferences for both incoming and outgoing. If you have a display phone, just press the prog key and scroll up-down until you "Line Prefer In". Play with this until you achieve the desired results. Thanx a bunch! John Berry, Owner Lantex...
  12. jonnybb1

    Forwarding to VM on no answer

    My suggestion is you download the user guides, and the Feature Manual. In them you'll see where you set DoNotDisturb, Fwd/Bsy/NoAns, FWD all Calls, and so on. On a display phone it's easier since you can see what your doing. Also in the Programmator Software, Under the extensions settings, you...
  13. jonnybb1

    Faxing on Broadvox SIP trunks

    At the last webinar for the TDA50G, it was stated that SIP Faxing is unreliable and it's better to use other means (POTS, eFax...). Thanx a bunch! John Berry, Owner Lantex Voice & Data Systems San Diego, Ca Business Telephones, Cabling, VOIP, Access Control, and more! http://www.lantex.com
  14. jonnybb1

    NCP500 Delayed Ringing On Analogue Trunks

    It takes at least 1-2 rings for caller id to come through. But I agree, go to the LCOT Card properties (under 1.1) and near the bottom you'll see the settings. Play with them until the customer is happy! Thanx a bunch! John Berry, Owner Lantex Voice & Data Systems San Diego, Ca Business...
  15. jonnybb1

    KX-TDA30, Analog Lines not connecting to call immediately

    It would seem there was possible something in the programming, maybe as rivet said, it was in the ARS table. If all else fails, do a backup, a factory default, and test it. Thanx a bunch! John Berry, Owner Lantex Voice & Data Systems San Diego, Ca Business Telephones, Cabling, VOIP, Access...
See more

Part and Inventory Search

Back
Top