Recent content by jonks

I am having trouble receiving hotmail emails when i switch on our IPS on our internet gateways. Eveything else works but can receive email from hotmail or yahoo mail. As soon as i switch it off the mail is delievered. Any ideas?

There is a cisco mag called 'packet' This was free but is now on subscription.

Building configuration... Current configuration : 2328 bytes ! version 12.3 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname Southend ! boot-start-marker boot-end-marker ! enable secret 5 $ enable password 7 ! mmi...

We have a similar setup to what you are trying to achieve. We run a MPLS primary line and a IPSec VPN as a backup. Our failover takes less than 10 seconds to cutacross and a similar time to cut back. We use GRE tunnels with OSPF on the MPLS and floating statics to failover to the VPN. You...

I have tried this and still cannot mirror two ports to one. As soon as i introduce the second port the mirroing stops completely.

And it is stackable.

dagnaget We need to mirror two ports on to one. We have tried the latest code for the 5510 and still no luck. If you find some way of getting this working please could you let me know.

I am running version sw4.1.1.12 fw4.1.0.10 Any ideas

We hare having trouble with port mirroring on one of our 5510's We can mirroing on port to another no problems however we are unable to mirror two ports to one port. For exampele <> port x works but <> port x and <> port y will not Has anyone experienced this before.

I use solarwinds switch port mapper. excellent software that maps your whole switch see link below. http://www.solarwinds.net/Tools/Engineer/Categories/Network_Discovery.htm You can download a 30 day trial

Last week members of a distribution group in AD all appeared greyed out, however the individual accounts seemed fine. This was down to the fact that the limit had been reached for the number of memebers in a distribution group. The strange thing now is that the members of the Domain Users...

use the command csim start 9 then the number hope this helps

We migrated from a BT fusion PBX to Cisco IPT and we now use Identapop pro. Works very well. http://www.identafone.com/cidpop.html give it a try

Nortel have a bit of software that intergrates with the contivity switch its is called Tunnel Guard. The software wil check the PC to make sure that it has the required security/ anti-virus/ firewall / patches before it is allowed to build a tunnel

You have not answered whether you can do an immediate divert to another number rather than voice mail. Can this be done.