Recent content by Jon80FLT

Rfeenie, you nailed this one! I had done a complete reformat and win98se reinstall about 3 months ago. I have been having probs since then. After some searching on the DELL website, I found the info about PHDISK, and how to reinstall the PHDISK file. Yes, I was getting an error message about...

Alternatively you can bring up your system resource meter and let it graph what's being used and what processes are taking up CPU time and then look at the log/graph in the morning... My system resource meter does not seem to give me the option to log/graph the info...it only seems to give me...

Hi All! I'm having fits trying to figure out what keeps my system from "waking up" after going into sleep mode. Is there a logging feature that I can set to see what, and in which order, applications get shutdown or wakeup from "Standby"? I have a DELL PII-300Mhz laptop...

I'm not aware of any 10' drill bits, but I do have a 4' drill bit. They may make 4' extensions for it...check Home Depot. This assumes you have a tall enough crawlspace to work in, of course. Good luck, Jon

Try Here: http://web14.compaq.com/falco/sp_list.asp?action=drivers&model_number=5528&cat=Desktop Good Luck, Jon

OK, I just want to get your opinions here. I think I know the answer, but I could be wrong. I have a PII-266 MOBO. I just got a 128Meg/100Mhz DIMM to upgrade. The guy at Fry's told me I will have problems with the RAM because it is 100Mhz and my bus speed is 66MHz. He said I needed to get the...

Thanks WyB... You hit it on the head! My TCP/IP buffer size was set to "0", I was able to set it to 32K and now my speeds approach those of the first 2 computers. Thanks again. Jon

Hi All, I hope someone here has dealt with, and solved, the problem I am having. I am connected to the internet by way of Cable modem. I am using the Linksys Cable/DSL Router (excellent device!) and an 8-port 10M/s hub. I have 5 computers connected to the hub. All cableing is Cat5. My...

I have a similar situation where I have two buildings about 100' apart. Right now I have an RG/58 (10Base2) coax cable between the buildings. It works ok, but I had some problems with a corroded connection so I looked into a wireless solution. I got the Lynksys WAP11. It claims that it will...

Try a new power supply. Jon

What is a TDR?

I'm thinking of replacing the Coax with the Linksys Wireless Network Access Point. http://www.linksys.com/products/product.asp?prid=157&grid=19 (it looks like you will need to Cut & Paste the whole link. How do you post a link here? This board keeps adding a ";" between the...

WyBNormal said:Get rid of the connector and fix it right I guess I neglected to make it clear that I DID replace the bad connection, but the impedance on the coax still stayed too high. Maybe the coax has stretched from being strung between the 2 buildings? I had continuously taped it to a...

KJonnnnn said: Dump the IPX.. and netbeui What OS? All machines are running Win98SE. If I dump the IPX and NetBeui, won't I loose the ability to share resources (printers, fax, harddrives)? I have a little more info to add. After working till 3am last nite on the network, I made some changes...

I'm sort-of a newbie with networks, though I have had this small network up for a couple of years. My problem is that I just upgraded my server, now my clients seem slower. Some details: * I am connected to the internet thru a cable modem. * I have upgraded to an AMD K6-III, 333Mhz acting as...