Recent content by johnmofb

You could consider one of the portable heater/air conditioning units. They run about $500, and can keep the temperature with the specified ranges, plus most will also dehumidify. Installation usually requires some sort of venting through a 3 inch flexible hose, similar to a clothes dryer and...

I ended up finding a 15k and plugged it in. Every thing is fine. I knew in theory it should all work, but in 11 years I never had a drive go bad in any of my RAID arrays. So the theory vs real life, made me want a second or third opinion. Thanks, John

Thank you, I thought so. I discovered the bigger drives 10k and the existing 18s are 15k. Will the speed difference matter even for temporary use? John

I have a ML 370 with a bad drive in a RAID 5 array. The drive is an 18 gig SCSI Ultra 320. I don't have any spare 18s, but have a used 36 gig SCSI Ultra 320. Can I hot swap in the 36 to replace the 18 that failed? Does it matter they are different sizes and the 36 was from a different server...

It's a really mixed. Some pay the balance in full every month other pay by the invoice and only with an invoice. I checked with the person who prints the statements and they have been printing using a date range and not checking the "print open items only" check box, so there would be detail...

This is the customer service departments idea to simplify the statements. They seem to think that a basic, here are your charges and here is your payment, is better than seeing each invoice and payment. Apparently this proposed change is a result of a survey of our customers. I am not so sure...

Our company would like to change the A/R balance method from O-open item to B-balance forward. Is this as simple as changing the customer records from O to B? What happens to existing invoices and credits, do we need to do manual reapply to clean up the accounts? Thanks, John

I have been using the RhinoPro for about a year. It is primarily used on-site, for new wire pulls, patch panels and replacing old hand numbered labels. I use the 3/4 white and yellow nylon labels wiring. It has some nice feature for the price.

We had the same problem with a 780. I believe the problem was a result of transporting the printer with the toner cartridges installed. Most likely the vibration during the move, or other handling shook some toner on to a sensor and prevented it from sensing the installed cartridge. A good...

Compiled reports in Crystal Reports for Macola (CR 7 with enhanced formulas)show an error when run from a Win2000 machine, "MACOLAFmtPhoneNo({Phone}) does not to appear to be a part of the formula." The error does not appear on Win98 PC's and the reports runs in Crystal Designer and...