Recent content by johndeleon

I built it as an ACD. I created it like JohnPoole said in an earlier response. I can go ahead and create a phantom TN. I'm just not sure of the steps to create it. Thanks. John De Leon

Version 2911 Rel. 25 ISS 40 John De Leon

How do I check it? John De Leon

I get an error SCH0101 when I type ART for the type. John De Leon

It allowed me to change TRNX and EXTT, but I cannot change RDR DATA and FTR DATA to CFF. I receive an error SCHOO99. John De Leon

I created like this; LD 23 NEW 0 1865 (EXT) MAXP1 NCFW 91972XXXXXXX and I just accepted the defaults throught the rest of the responses. John De Leon

Okay. I was able to build the ACD. It will forward if the extension is dialed internally. If you dial the number from an outside line it rings directly to our switchboard. How do I make it NCFW to a long distance number. John De Leon

Can I make these changes in LD 20? John De Leon

How do I created a Phantom TN that automatically forwards to an outside long distance number? John De Leon

To "nortelfonguy": I understand most of your post. Yours sounds workable. This is what I have, if you could explain how I would do it step-by-step it would be greatly appreciated; Analog line 1 ext. 1075 Analog line 2 ext. 1783 I need for analog line 1 to transfer to analog line 2 when...

Johnpoole - They are two DID fax analong lines. We're trying to get a fax to transfer an incoming fax between certain times of the day to another fax and on the weekends too. Our thought was that we would set the 1st fax to transfer the call to the 2nd fax if it didn't answer. Is it...

When do this; 1-In your class of service, set FNA, HTA 2-In ITEM, type, FTR_FDN_(ext. that call will hunt to) will the call that is coming in forward/hunt to the other extension after a set number of rings or how do I set it so that it will forward if there's no answer at the 1st incoming...

Will I be prompted for a time schedule at some point while performing the above steps? John De Leon

We have an option 61c. Is it possible to set an analog line to forward to another analog line based on a time schedule? These are for fax machines. Thanks. John De Leon

I work at a hospital. At one point we had contracted a company that would handle all of our 1411 calls. Now, the calls are not routing to them. Instead they are routing to the AT&T our LD carrier. How can I verify this and/or make the change to route back to our contracted carrier to handle...