Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by john82

  1. john82

    IPSI duplication issues

    I have recently added a port network to an enviornment. I have duplicated IPSI's in this port network. The problem is this, when I do a status port-network X, my A ipsi has a Y next to control channel and Dedicated tones, my B IPSI has a N. I know that one way or the other the A should only have...
  2. john82

    S8720, AES, Verint Audiolog Cmapi Integration?

    I have an Avaya 8720 and I am attempting to integrate it with a Verint call recorder via AES. My CTI link is up and functioning. I have created several CMAPI softphones and Verint has installed thier equipment totally. Here's the thing, I have created 5 softphones and three out of the five...
  3. john82

    FTP Backups

    Captain... No this is my own PBX so I am on the network. Mitch, is there no way to change the permissions or owners of that directory without Avaya?
  4. john82

    FTP Backups

    I have an Avaya S8720 and when attempting to manually backup the server I get the following: THEPID is: 7413 backup: 40: FTP Error: OOPS: vsftpd: refusing to run with writable anonymous root backup: 40: FTP of backup image to anonymous at 10.0.9.7 failed -- Backup terminated for xln Performing...
  5. john82

    Transfering out of a mailbox in MM 3.0

    Here is my problem: If I am in a mailbox and I want to transfer to a user in the PBX, I would hit *t the extension and #, this works, however if that call goes to cover, I get a recording that states "transfer cannot be completed please try again later." While tracing in the switch I get a...
  6. john82

    USB PC Card Reader

    This really happens on all versions, patch or no patch, pulling the usb and replacing the card does not work, the process is hung in the server not the reader.
  7. john82

    USB PC Card Reader

    I was wondering if anyone has ever encountered a problem with a USB Card Reader used for backups on an S87XX server. I have had multiple instances of the thing locking up when a user attempts to run a backup more than once. When you go in later and try to run a backup, it states "BACKUP ALREADY...
  8. john82

    HELP!!! Delay in retrieving messages

    My MM 2.0 system (MSS Backend) is in trouble... There is signifficant delay while attempting to login to your mailbox. I dial the pilot number, it speaks the recorded name and prompts for password. After inputting the password, you can experience anywhere from 5 to 25 seconds of delay before the...
  9. john82

    MM Reports

    I have a MM 2.0 system, I have a single ported MAS (q-sig) and a secondary MAS that I use as a tracing server. The backend is an MSS. Here is the problem: My report data (Port Statistics, Basic Metrics, etc...)does not have any information. If I poll a week ago still nothing. Some reports...
  10. john82

    Dropped calls

    I have a newly installed S8300 with three G700's. It has all of the latest firmware and CM patches, however about twenty calls a day get dropped when somone is trying to transfer them. This is not isolated to one station, board , or gateway... It happens across the board. There is not evidence...
  11. john82

    IP Phones

    This is more of a communication manger and IP phone question. I have one 4621 IP phone and every night at 3am it makes a change to itself. When I do a list history command it says ip-a and another says ip-u. Anyone have any ideas
  12. john82

    Increasing MM ring duration on 2.0 systems

    The changes are dynamic, they do not require a reboot.
  13. john82

    Increasing MM ring duration on 2.0 systems

    I recently was playing with caller apps and built one with three steps. 1.to my extension 2.to my other extension 3.To my cel phone (it rings an exported station that goes to cover and the first point of my coverage path is a cover remote to my cel phone....whew!) So I wanted prompt three to...
  14. john82

    2.0 Web Client

    Thanks evryone, I downgraded to WIN 2k LOL
  15. john82

    S8700 Time Slippage

    Does anyone know how to set the time drift ratio via the command line of an S series server? I have access to the command line on my own system and wanted to test the time parameters. Thanks
See more

Part and Inventory Search

Back
Top