Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by jnzy111

  1. jnzy111

    Duplicate IP address with Opti 420S phones

    Our Company decided to pull the plug on the Siemens contract years ago so we have been working on an older Rev; 5.0.19 and many of them have been getting stuck in Initialising so I've definately traced it to an issue with phones getting duplicate ip addresses. Has any one else experienced this...
  2. jnzy111

    STATION IS UNASSIGNED OR AS AN ACD NUMBER error when setting CFU

    Thanks Birdseye I deleted it and recreated.. it was setup in the numbering plan to route out to a SIP gateway that we have so it worked by just being routed although it wasn't defined as a station.
  3. jnzy111

    STATION IS UNASSIGNED OR AS AN ACD NUMBER error when setting CFU

    Hi donb01, the station won't come up in assistant.. Hi birdseye; DIS-WABE:TYPE=GEN,CD=2901; H500: AMO WABE STARTED ------------------------------------------------------------------------------ | DIGIT INTERPRETATION VALID FOR ALL DIAL PLANS |...
  4. jnzy111

    STATION IS UNASSIGNED OR AS AN ACD NUMBER error when setting CFU

    Hi All, I'm trying to setup a call fwd unconditional but get stuck at line F01: ADD-ZIEL:FWD,2901,VCE,80116568762000,"",CFU,INT,SYSTEM; H500: AMO ZIEL STARTED F01: SOURCE STATION 2901 IS UNASSIGNED OR AS AN ACD NUMBER (AMO DNIT) CONFIGURED. Any one know why my station 2901...
  5. jnzy111

    H3K / Expressions VM not going to VM from external callers

    Hello, My H3K V4 suddenly decided to drop calls from external callers instead of forwarding to voicemail on no answer. Internal forward is ok. I've had the local Telco check the T1's and they say they get a disconnect from the switch. Any ideas on what could be causing this or what I can...
  6. jnzy111

    How to change extension on the phone?

    Maybe it's the firmware I have or something.. I did not try both at once but.. I did get it to work by Option, Right arrow to menu item Logoff Thanks!!!!!!!
  7. jnzy111

    How to change extension on the phone?

    Hmm, doesnt seem to be working :-( any other ideas?
  8. jnzy111

    How to change extension on the phone?

    Hi all, I have an Avaya IP 5610SW phone that I need to set it to a different extension. Is there a way to do this from the actual phone? I was told hold the * down as I'm booting up but that only seems to get me to the IP and system stuff, not the actual extension the phone needs to be...
  9. jnzy111

    Redirected Dialed Number - how to activate? H4K V2

    Hi All, We setup a new (Asterisk) mail server but it's not getting the Redirected Dialed Number Information so there is no way to tell how to identify the redirected number and send it to the correct mailbox. Is there a way to turn on the Redirected Dialed Number Information Service? This is...
  10. jnzy111

    Hipath 3K - which cards support T1 lines?

    Thanks again donb, I bow to your great knowledge once again..
  11. jnzy111

    Hipath 3K - which cards support T1 lines?

    Hello, Can anyone tell me which cards support a T1 circuit on the Hipath 3K and if there is a way to find out which ports are in use or not? We currently have the following installed: CBCPR HXGM3 SLA24N HXGM3 STMD8 SLMO24 TMST1 TMGL8 PSU Thanks! ---Mike
  12. jnzy111

    Hipath 4000 V2 how to check logs and VM MWI problem

    Thanks Donb, sta-hista seems to work..
  13. jnzy111

    Hipath 4000 V2 how to check logs and VM MWI problem

    Hello, Does anyone know how to check the logs from AMO? In particular, I am hoping to find log data on a certain PEN (pen,1,1,13,1) Which goes to our voicemail server. Seems our VM server MWI (Message Waitin Indicator) intermittently does not come on for users with new voice mails unless I...
  14. jnzy111

    HiPath 4000 V5 Annoying Beep - On-hook Dial

    Our system will beep if you have a voicemail waiting..
  15. jnzy111

    Upgrading firmware on Optipoint 420 S Phones

    Thanks Guys.. ---Mike
See more

Part and Inventory Search

Back
Top