Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by jnfern

  1. jnfern

    3300 Clustering with Asterisk (SIP)

    If by 'know what you are doing' means taking random guesses and seeing what happens then I'm an expert ;)
  2. jnfern

    Incoming Caller ID

    It was set to No before I started this process of trying to get it to appear.
  3. jnfern

    3300 Clustering with Asterisk (SIP)

    The reason why I said using it in OPS Manager is because the help page within the System Admin for the 3300 says the Remote Directory Number form should not be used to add details, only OPS Manager should be used. I've not had time to look at this any more yet, but I will report back on if it...
  4. jnfern

    Incoming Caller ID

    Thanks for your reply. Both the Display ANI... options are already set to Yes for both the Trunk CoS and the phone CoS (as well as ANI/DNIS/ISDN Number Delivery Trunk on the incoming trunk). It still just displays Cable & Wireless.
  5. jnfern

    Incoming Caller ID

    Hi all, We have several 3300 ICPs, most of our numbers are DID and the calls come via an old analogue ISDx. When our IP Phones ring, the display just indicates Cable & Wireless (our provider). We have Mobile Extension running, and the logs within Mobile Extension are able to correctly give the...
  6. jnfern

    3300 Clustering with Asterisk (SIP)

    I understand ... although I'm not quite ready to try those ARS Digits Dialed just yet given what could happen if it doesn't work quite right. I might try it with an XXX + 1 route to SIP trunk so the most I can break is a set of 10 extensions - just as soon as I get a range of 10 digits I can...
  7. jnfern

    3300 Clustering with Asterisk (SIP)

    Thanks for your post slapin. I understand what you mean about having the extensions residing on Asterisk routed the the ICP which has the SIP Trunk (Remote Directory Number Assignment), however I don't get what you mean by: "Then make this SIP trunk the last choice for prefixes pointing to xxxx...
  8. jnfern

    ME Client

    The requirement for the Mobile Client to work is that the device must have access to the Internet. Normally phones can access the Internet via GPRS, 3G or WiFi. The Mobile Client software doesn't care which method is available (it might not even be able to tell), as long as one is available...
  9. jnfern

    3300 Clustering with Asterisk (SIP)

    Hi all, We currently have 4 Mitel 3300 ICPs in a cluster. I can create a 4 digit extension on any ICP, and call this from a phone on any other ICPs. I have created a SIP Trunk to an Asterisk server, currently I have 4 digit extensions on this, and I'm using ARS Digits Dialed form to say 'If I...
  10. jnfern

    Mobile Extension - Alternative User Configuration?

    Thanks for the reply. This is something which I have considered, although wouldn't be as tidy as doing it all through the database. It looks like I might end up doing it this way as I can't find any way to make the system reload the database data without actually restarting the ME service.
  11. jnfern

    Mobile Extension - Alternative User Configuration?

    Hello all, The current user administration web page from Mobile Extension isn't good enough for what we want. The 4 digit password is a concern to open it up to the world, and we would like to be able to specify what settings the users can and can't change. I've been investigating other...
  12. jnfern

    Mobile Extension - Desk phone only rings once

    isrm, Thanks, you were correct. I had checked and double checked my settings - however the notes I made had the Desktop Monitor and Outgoing Lines CoS the wrong way round - so there was no 'suppress simulated CCM' for the outgoing lines. Changed and all is working. Now to find out how to pull...
  13. jnfern

    Mobile Extension - Desk phone only rings once

    I know we have some form of ISDN link with what was described to me as a bank of SIM cards for calling mobiles. There is no passcode or anything like that. The thing which I don't get is why it works fine with the outgiong line on ME002, but not any of the other ones. I believe the ISDN link...
  14. jnfern

    Mobile Extension - Desk phone only rings once

    Hi all, We have 5 Mitel 3300 ICPs, and I have finally configured Mobile Exchange to work correctly with 1 of them. I have now tried to expand the configuration to to other 4 ICPs, however I'm experiencing a strange issue. I've created one domain within Mobile Extension for each 3300. I...
  15. jnfern

    Mobile Extensions: No audio

    I am able to log into the web application from a machine on the same subnet as the phones. The system running Mobile Extensions only has Mitel Standard Linux and Mobile Extensions on it. There is a single interface card in use (there is a secondary one in the machine but this is not configured...
See more

Part and Inventory Search

Back
Top