Recent content by jivinjoe

I was able to set up some down time, then I ohmed out the cable. I got the console install and up and running. Only thing I can't change yet is when both console are on its seems to alternate calls between them both. So I just have to make sure they put the console in night tone when they are...

Well I looked at the Din plug this morning and it has a cap that is crimped and soldered on so I can't open it and look at the pin-out. Dang. I'll wait a couple days and see if anybody knows it. If not then I might destroy it to find out.

Thanks for the info on clearing the RPV erros. I have a existing cable I can take apart and check but then the only console will be down. Maybe I can do that some morning, shouldn't take that long. But we know what happens when you say that lol

Ok Im must be not be explaining what I need correctly. The 9755 ATC Console phone has a 8 pin din plug you have to use to hook it up, I do not have that cable and they do not sell it anymore, so Im making one. I have the solder 8 pin din but I need to know the pin-out on the back on the phone...

I have a new power supply from blackbox that just has the screw terminals. But the pin-out I need is for the 8 pin din connector on the back on the 9755 ATC console phone. From there it will go to a break out box I will make for input from power supply and wiring back to the ATC card in the CBX...

Hello everyone - Im adding a console phone to my site and they no longer sell the cable that goes from the 9755 ATC to a break out box. I'm looking for the pin-out for the Din plug on the back on the 9755 ATC so I can make my own cable. Can anyone help me out? Also looking for the command to...