Recent content by jinjin

You could try parallel ringing facility. PLLNI:MDIR=3200,SDIR=3199; You can have up to 2 SDIR number for 1 MDIR. Or you could do and immediate diversion for 3200. CDINI:DIR=3200,DIV=3199;

Can you block the board and try to restart? BLDBI:BPOS=X-X-XX; RFBOI:BPOS=X-X-XX; BLDBE:BPOS=X-X-XX,ALLFM=YES;

How about remove the alarm code + reset + reinstate the code back? ALDAR:CODE=106; ALREI; ALDAS:CODE=106,CLA=3;

TLU80 is 4 port 4W E&M card. TLU83 is a BT PSTN interface card with 12 2W ports.

Sig D7 set to 1 may sort your ring tone problem. You may need to look in to quick connect option for the speech path problem.

You can use Trilliums (Telephone Recording Adapter) to tap off the audio from the hand set. There are passive and powered Trilliums available for the distance issue.

It is *22#exch code and the number# CDIV D3 set to 1.

Can someone help me, what voltage or indication I can expect on the Watchdog output when the system is healthy and what O/P pair it should present it self. I am using ALU2 and BC10.

Have you check your UPD files.

Front Panel cables are 9 pin straight through connection. You can buy from anywhere (RS).

Avstral, Can they deliver to UK. Can you please send some info about this place. Thanks.

We are using QDLU. Ericsson is supporting it anymore and we have noway of sourcing this cards. That is why we are looking for an alternate option, which is called EDLU. Apparently they are using this in Singapore and Ireland. It is more like an HDU, pluggin card but has an interface for the old...

Hi guys, Has anyone heard of EDLU cards which were used as backup media fir BC Exchanges. Where I can get some infomation about this?

Thank guys. You learn everyday..

to whosrdaddy, I wouldn't recommend to connect modem on port1. We used to use westermo modems on port one, it locks up NIU port now and then. It works fine on port2 and port3. Interesting .....