Recent content by JimISManager

We have a NEAX 2400 IMS, and I need to know if there is any way that the switchboard console can be added to a pickup group. Thanks in advance for your help. Jim

Bo, Thanks for the comments. I think that the problem was that the router was taking longer than the timeout on pcanywhere. When I tried with a newer version (11) it was able to connect. Thanks again! Jim Jim

Thanks for the help everyone! I figured that it probably was not possible, but was hoping I was wrong. Jim

I have an NEC 2400 IMX using Matworx. Is there a way to have a group of phones in a hunt group, and if all of them are busy that it will go back to the original phone number dialed and to their voice mail? Right now, they are forwarded on a busy to each other (in a loop) and if they are all...

micker - there is only one slot for the card. I was able to get this working. I talked to a printer repairman friend and he said that the formatter was bad. After I tried a new card, etc. I was able to get an external jetdirect for the computer. Thanks for your help! Jim

I have a NEAX 2400 IMX. We recently changed from copper to a dynamic T1 line for our calls. When this change happened, we no longer have outbound caller ID. I have been told that this will not work (we are in a rural area) because the telco is not able to do it. Because we are a hospital we...

It shows 24 available, but how would you page to these phones? (This may be good enough for my purpose) Jim

Gary, Thanks for the help. I think what is happening is that on the display of the phone it shows the FDB and FDN and they are changing that in the morning as well as cancelling the FDA. Is there an easy way to change the options that are displayed there? Thanks again! Jim

I know that the CF will override the busy and no answer, but what I want is when the CF is cancelled in the morning, for it not to cancel the busy and no answer forward. Any suggestions for that?

I have an NEAX 2400 IMX with NEAXMail AD-40 system. On one of the phones it has the busy and Do not answer forward to another extension, at night they forward all calls to an outside answering service. In the morning they cancel this forward. Is there a way to foward the Busy or Do not answer...

I have an HP LJ2300N that was working fine a couple of days ago. Now, the printer does not recognize the jetdirect card (615n). I tried replacing the card, but it still doesn't see it. When I print off the configuration page, it doesn't show on that either. I tried following the instructions...

[COLOR=red]First question is What system have you got?[/color red] The system is an NEC 2400 IMX [COLOR=red]If it's the small office system (ie not an IMG,IMX or IPX) and are you accustomed to MOC mode? If so Cmd 85Y where the Y is your area development pattern number (usually 0)De area code De...

OzzieGeorge, How would I look at that? (I am using MatWorx)

The company that I use (in Evanston WY) is Eschelon Telecom. They have always been great to work with. Good luck

I would like to set an extension to forward directly to a helpdesk. I am able to forward all calls on the extension, but when i put in the number (918881112222) it will take the number the first 12, 9 for the outside line and 11 for the number), but when I add the extension(4 digits), it won't...