Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by jhaudio

  1. jhaudio

    Allow Users Larger Messages

    You will find those options in active directory under the exchange tab I believe. (open active directory users and computers, go to users, right click on the user you want to change and go to properties, then you should see an exchange general, and e-mail tab amonst others) You should pretty...
  2. jhaudio

    Outlook/Exchange SMPT communication fails over WAN

    I agree... we do use OWA for almost everybody in the company. The issue is that our CEO does not want to use OWA, and instead wants to (continue) use Outlook or Outlook Express so that he can recieve his other 4 e-mail addresses together externally. I would really like to find a way to tunnel...
  3. jhaudio

    Outlook/Exchange SMPT communication fails over WAN

    I know there has to be SOMEONE who has experienced this issue... I hate reposting things, but I looked for hours and can't seem to find the same issue (at least not with resolution). We are using Exchange 2003 Enterprise. All SMTP communication works fine, most users connect on campus via the...
  4. jhaudio

    Raid controller failed, Ntdetect failed !?

    I just wanted to add that the raid card is a Dell PERC 4e/Di in a poweredge 850 server.
  5. jhaudio

    Raid controller failed, Ntdetect failed !?

    We have a Dell poweredge 850 that was running Windows 2003 Server (standard) SP1. The RAID controller failed (always hung during its post). Dell replaced the raid controller, and it saw the RAID set (raid-1) immediately. However, on boot we recieve the error "NTdetect failed." I ran a verify...
  6. jhaudio

    Failed raid controller, NTdetect failed... !

    We have a Dell poweredge 850 that was running Windows 2003 Server (standard) SP1. The RAID controller failed (always hung during its post). Dell replaced the raid controller, and it saw the RAID set (raid-1) immediately. However, on boot we recieve the error "NTdetect failed." If we hit F8...
  7. jhaudio

    Exchange 2003 pre-submussion qeue sticking?

    Thanks again for the information. You are correct. Since the vast majority of the spam that we get is directory harvesting, I moved that scan to be the first scan that is run, directly after all of the whitelisting. I also lowered the scans that run DNS query to the end of the scan, so a far...
  8. jhaudio

    Exchange 2003 pre-submussion qeue sticking?

    Thanks for the response! I have seen that in some posts... but what I dont understand is that it did not seem to start clearing when I disabled GFI. I did not simply turn off the individual filters... I actually stopped the three GFI services, set them to manual start up, and rebooted without...
  9. jhaudio

    Exchange 2003 pre-submussion qeue sticking?

    First off, I am a very competent in the desktop support arena, but unfortunately I know enough to be dangerous when it comes to server administration. Unfortunately for me, I am stuck temporarily in this possition, so bare with me... My company is running Exchange server 2003 (6.5.7226.0) on...
See more

Part and Inventory Search

Back
Top