Recent content by jesseeu

Here is a question about ISDN from the Sybex book I'm studying. Can anyone give their opinion on which three are the correct answers? I am certain that the book is wrong here. And it is not listed in the errata on sybex's site. ------------------ Whith regard to ISDN, which of the following...

So there are only two sims on the Exam?

Global Knowledge has it for $3000, I think. That is for the boot camp. I am going to one done by Academy Florida that is $2000 (http://academyflorida.veplan.net/show.aspx?mi=376). Fortunately my company is footing the bill. I was originally signed up at GK, but they cancelled my class two...

I looked through the Sybex erata (http://www.sybex.com/erratatracking.nsf/weberrataform?OpenForm&ISBN=4391), but found no mention of an error on setting up VTP. I'll make sure to do it the Cisco Press way. Just thought it was kind of odd that it was wrong in the book and the routersim. Will...

I am 24 and will be taking the test (after a 5 day boot camp) in a few weeks. I've been studying the Sybex book and doing the labs on a simulator. I also have two 2500s and a 2950 I borrowed from work. I've found the physical hardware is good for familiarizing yourself with the ports and...

Hello all, I will be attending a CCNA bootcamp in a few weeks and I've been studying the Sybex CCNA book. I've been going through the Labs in the VLAN chapter on a 2950 from work. When I went through the steps as shown in the Sybex book for setting the VTP mode, domain and password, I kept...

This worked. Thanks a lot John.

Yes, there is an "ip classless" statement followed by my static ip routes.

Please forgive me for what seems like such a basic question, but I have looked through several help sites and reread, just to be sure, how RIP works. How do you set RIP to only perform RIP on specified networks? I have networks 10.1.0.0, 10.2.0.0, and 10.100.0.0. I need to stop RIP from...

I've used phone wire before for ethernet connections and yes it does work. You may run in to problems if you are running multiple data connections on the same cable due to interference (for example, could run two data connections on the 4 pair cable). I also don't think you'll get 300ft out...

I have to hit "enter" after entering in the password. Have you tried that?

Try creating the phantom TN first with CFXA then go back and do a CHG CLS ITEM FTR DCFW xx xxxxxxx

Can you post exactly how you typed in the time parameter. It seems like anything I try gives me a TRA306 or TRA101 error. Thanks, Jesse

You could create a phantom 500 set in LD 11 and have it Default Call Forward (DCFW)to the outside line. I have a few numbers set up to forward a users phone to a temporary remote location. Here's what I have in my notes from other posts in this forum: INSTRUCTIONS FOR SETTING UP A PHANTOM...

Well, there's phonemaster, but it's expensive. At least a couple grand. And it'll go up depending on how many TNs you have and how many PBXs you have. I'd just study these forums and teach yourself how to do things.