Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by JeremyParr

  1. JeremyParr

    Startalk Flash

    I have a 4 port Startalk Flash Messaging unit on an older Norstar KSU. The customer does not have the Sys Manager password, so I went through the F985,9,etc procedure to reset it. Now, when trying to log in via F983, I get "Not Allowed", vs the password error we had before. All of the phones are...
  2. JeremyParr

    46xx Name for DHCP??

    Sounds like you just need new network admins. Deleting a lease because there is no hostname associated to it is pretty dense.
  3. JeremyParr

    DND and Hunt Groups

    Assigning a hunt-ns buttton redirects the entire hunt group. I want each of the two operators to "log" in and out of taking calls, just like an operator console would do.
  4. JeremyParr

    DND and Hunt Groups

    Not to be rude, but I don't see how that would do anything for me. I am trying to emulate the behavior of attendant consoles. We aren't running any digital stations at this site, only IP, so attendant consoles are not currently an option.
  5. JeremyParr

    DND and Hunt Groups

    I have two operators using 4621 phones answering the same incoming trunk group. I'd like to set up a hunt group, to distribute the calls between the two of them. Problem is, when the phones goes DND, calls still ring to it. Is there a way around this?
  6. JeremyParr

    Avaya IP phone boot problem

    Is the gateway address live? If you provide a default gateway via DHCP and the router at that address is not turned on, the phone will reboot. Try removing the default router option from DHCP and reset the phone.
  7. JeremyParr

    S8400 TN8412AP and G650

    My understanding is that the IPSI needs to live in slot 1. At least, that is what the docs say, and what has worked in my experience. The S8400 integrates as an external media server (8500/87xx) that just happens to be physically located in the G650.
  8. JeremyParr

    PoE Switches

    The Cisco automatically assumed that the 4621 draws 20 watts. The command "max-reserved-power" or something along those lines can be used to tell the switch the phone actually draws 10 watts, or whatever the number is. This will let you power 48 phones from a 3560-48-PWR
  9. JeremyParr

    4621 Call Appearance Width

    Anyway to adjust this centrally? Its pretty damn annoying that the call appearance takes up two collumns by default.
  10. JeremyParr

    GFI Faxmaker and VOIP

    Your need to run G.711 for data calls, with no echo can.
  11. JeremyParr

    Recording Line Vender Recommendation /Config

    Racal, Dictaphone, Nice.
  12. JeremyParr

    Time/Date Display

    Adding a TmDay button to a 5610 will display the time and date, until the phone is rebooted.
  13. JeremyParr

    Time/Date Display

    Am I missing something terribly simple? I want to display the time and date on the phones connected to a new IP Office 406 running 3.1. Nowhere in the config can I find anything. I have both 5610 and 2420 phones connected. If I plug in a 6408, I am able to switch the display to TmDay, but after...
  14. JeremyParr

    "Upgrade" from 5.0A Enterprise to 5.3 Corporate

    None of the CODELOCK values in GL01 were set to 1.
  15. JeremyParr

    "Upgrade" from 5.0A Enterprise to 5.3 Corporate

    I ran a `SELECT * FROM "GLAFS" ORDER BY "GLAFS"."FSCSDSG"` and it returned over 11k rows. About a third had the value in the FSCSDSG column set to "1" and the rest were "A". None of the other columns had any simmilar looking data, so I assume this is the right place.
See more

Part and Inventory Search

Back
Top