Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by jenn01
-
Bonded t1 frame-relay 3640 configuration help!
I found the problem. Following Cisco's advice (and as you found at Cisco), I entered the frame-relay traffic-shapping in the config. That will mess things up. After I removed this from the config upload/download with both T1's up were about 3Mbps. When I disconnected one, download was at half... -
Bonded t1 frame-relay 3640 configuration help!
I agree jneiberger. Just like all that time I spent in college learning things I've yet to use in the real world. hahahaha Since it sounds like you have a better diagnostic approach than our supplier, I've got a question for you. I've been playing around with the bonded circuits and sure... -
Scripting & PUTTY.exe
Sounds great kevint21. Now all you have to worry about is your Windows machine crashing, worms, viruses and all the other problems that come with Windows. hahahaha Have great holiday weekend, Jen -
Bonded t1 frame-relay 3640 configuration help!
Hi jneiberger, You are soooooo 100% right! Yesterday when I started working on this and couldn't get things working, I called them to verify that things were up and running correctly. They confirmed everything on their end was right and the problem is on my end. I struggled with this until... -
Scripting & PUTTY.exe
Hey Ru55ell, Perl is fairly easy to learn and there's a ton of support out there and chances are, what you need has already been written. There are already perl packages for connecting with Cisco routers. Check this out: http://search.cpan.org/~joshua/Net-Telnet-Cisco-1.10/Cisco.pm For a... -
Scripting & PUTTY.exe
If it were me, I would do it a completely different way. I would install ActiveState's Window's version of Perl and write all the scripts you want and have total control over everything. I do this from a Linux box and monitor switches, routers, logs files, SMTP, POP, HTTP and everything else you... -
Bonded t1 frame-relay 3640 configuration help!
Thanks jneiberger, Yes I've read that and I tried using traffic-shapping as well. In fact I even tried their sample configuration on that page and that didn't work either. When I first realized I couldn't get it to work, I found this page in this forum... -
Bonded t1 frame-relay 3640 configuration help!
I'm a new Cisco user and had a bonded T1 installed, but can't get anything to work. The provider supplied me with a configuration for an 1841, but I can't get that to work in my 3640. Here are my specifics: Cisco 3640 Router with 2 WIC-1DSU T1 & 1FE-2W 128MB DRAM and 32MB FLASH IOS Version...
