Recent content by jdumont

Existing 110 block with line1(phone) and line2(fax) wired with premise cabling. Need to add a wall jack about 2' next to the 110 panel. I plan on using a 2' piece of cat5 and the blue/whiteblue pair. Just need to know where to put the blue/whiteblue pair on the block. Thanks in advance.

actually".... Crucial.com has done a good job in making this kind of info available. http://www.crucial.com/store/listparts.asp?Mfr%2BProductline=Intel%2B+Motherboards&mfr=Intel&tabid=AM&model=D815EPEA&submit=Go ;;)

just tying to contribute to the community for the next person looking. Heck... maybe even someone with an Intel® Desktop Board D815EEA/D815EPEA. ;)

Intel® Desktop Board D815EEA/D815EPEA was the board in question. The ram did work in a newer board so I guess it was a compatibility problem. thanks for all the replies.

the intel mobo manual says max. ram is 512mb. If I install a single 512mb chip (which was pulled from a working pc I'm told) all i get is three beeps. I've seen on some computers where the boot screen shows more ram than what is actually installed. could it be that this mobo is seeing more than...

Cam commerce has a free version of it's Retail Star program dubbed Retail Ice. Single Pc, Single Store only. Supposedly free tech support and there is a bulletin board too. All you pay for is shipping for the software (and manuals if you want them). Updates get charged for shipping as well...

what I am trying to describe looks the same as when you are watching satellite tv and a bunch of tiny squares come on the screen when the reception is poor. Is there a proper term to describe this? Thanks in advance.

I am changing a 16port 10/100 HUB to a switch. I mean like for 120cdn dollars I can get an ASUS 24port MANAGED switch. Am I wise in going with a relatively new brand for network "switches" or should I stick with a 3com brand. Of course the 3com I have in mind is not managed. Thank you.

No... no opos drivers. Even tried installing it as a Generic/Text only printer. Thanks for the suggestion.

no luck at hardware group so I'll try posting here. i am doing this in a batch file before starting the pos program mode com1:96,n,8,1,p mode lpt1:=com1: I can print once or twice but after that it goes back to garbage. xp pro dos program runs full screen. I'll try it in a window for a while...

nope... took the cut codes out and still wonky. Well the ol gal is going to be replaced with a parallel.

the pos program has a receipt setup part to it. at the end of the receipt I put in a 27 105 code for cutting the paper. Is this screwing things up? we shall see.

tried running msconfig and add Com1AutoAssign=0 to the [386enh] section with no success. Any suggestions? The printer is at a remote location so not much I can do from here.

nope... running in a dos window is doing the same as when it is in full screen.

i am doing this in a batch file before starting the program: mode com1:96,n,8,1,p mode lpt1:=com1: I can print once or twice but after that it goes back to garbage. xp pro dos program runs full screen. I'll try it in a window for a while and see what happens. In the meantime any suggestions...