Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by JasonKIO

  1. JasonKIO

    IPECS MFIM-50 Line Released

    Hi All, Heres a weird problem that you may know the answer too.... We've got IPECS MFIM-50 with 3 analog lines going into it, its got 8 extensions setup so far. Over the past couple of days, we have an odd problem occurring. Incoming calls - the phone will ring, we pick the handset up, and...
  2. JasonKIO

    Call Forwarding with Multi-Call

    Heres another spanner in the works question... Can you do what we've done already (activate the Call Forward Third Party Mulitcall to External number option) with the Call Forward After X number of Rings as well? Jason
  3. JasonKIO

    Call Forwarding with Multi-Call

    The 9 was for the outside line in my example. Programmed it all up (had to change some COS but its all good) and works perfectly, Cheers Jason
  4. JasonKIO

    Call Forwarding with Multi-Call

    Ok, I think understand, lets say the extension I've got (with my DDI coming into the system is 1234. I want to forward to 5678 (for arguments sake, an external line), so I'll set a speedcall up... **67123495678 Any pauses required in there anywhere?
  5. JasonKIO

    Call Forwarding with Multi-Call

    Ok, I understand that that will bring the DDI (currently not the prime line of any of the handsets on the setup) to that particular handset, but then I need it to go somewhere else after that, so its forwarding twice... from DDI -> handset -> out to an external number so, your instructions...
  6. JasonKIO

    Call Forwarding with Multi-Call

    Mitel 3300mxe, running version 8 of the OS. Can a Third Party Call Forward be assigned to a speeddial and therefore a button on the handset?
  7. JasonKIO

    Call Forwarding with Multi-Call

    Hi Mitel Experts, Heres one for you all... We've currently got one DDI number, acting as a multi-call on seven handsets, all with extensions only (ie, no direct DDI access). When the DDI is dialed, all the handsets ring as we've put multi-call buttons for that number to appear on the 5212...
  8. JasonKIO

    Address Book Entries & Caller ID

    Yeh, lets say you've got extension 2000, and you want to put the number 01234 567890 as its outgoing CLI, but your DDI range is only 01234 567800-900, BT apparently can mask the outgoing number with the number you want, but heres the killer point, if extension 2000 doesn't have a DDI associated...
  9. JasonKIO

    Address Book Entries & Caller ID

    I've looked into this as well, apparently, to get a extension to show an outgoing CLI from a different range from your ISDN (perhaps an 0845, 0844, etc), you need to do get the telephone provider (BT in the UK) to mask it when it makes it an outgoing call. Jason
  10. JasonKIO

    Address Book Entries & Caller ID

    Answer 1A is what I thought might be the way of doing it. Answer 2B sounds interesting - where abouts in the Mitel 3300 config would I find the options to set that up for certain extensions?
  11. JasonKIO

    Address Book Entries & Caller ID

    Hi, Heres one for all you experts out there... 1) If we have a number of phones connected to a 3330 running v8 of the OS, is there a way of a group of them accessing a certain set of speed dials/address book entries and another group access a different set of speed dials/address book entries...
See more

Part and Inventory Search

Back
Top