Recent content by Jamiepockets

next week we will be,

easy to do, firstly you dont want this open to abuse, so use a if clid = xxxxxx then open voice session, press 1 to activate message or 2 to deactivate message, using the readvar savevar options this can be done. the code will cost you £500 to use as I have now applied for a patent on my hard...

its a problem with the sysadmin password, make sure you can log in to the server utility, I take it you have done this and accepted the license agreement already, if not thats were your problem lies. then make sure you have changed the server username and password in configuration on ccma. The...

the disks on the 1005ha servers are hot swap, persoanlly I always take oneof the drives on each server out as a backup before doing any work on the syatem, this way, if anything goes horribly wrong whilst installing the peps you have got your get out of jail free card. take the redundant server...

For your information guys and girls, have just had to raise a case in to Nortel for an issue with not being able to import customer reports via RCW, this is a DP sus 0703 Q02070680 - Scheduled and Ad-Hoc RCW reports fail after SU07 update

the logging out occurs with ccma su06, however not installing it gives a whole load of other problems, unfortunatley live with the 20 min logout or suffer more problems than it's worth

what patch release are you on ?? su 06 introduced 1140 and 1150's on CCT, though it still dopes not work, we still need to set this to 2004p2's for all 1140 anmd 50's this is to be fixed in su08

go to d:\nortel\iccm\bin, look for mrcv.ini open this up, change the ip address to your multicast send address, and port to say 6050. make sure you have at least one agent logged in double click mrcv.exe and this will show the multicast traffic being sent out. If not you may have a config...

Dubious about putting this on at the moment, feedback would be appreciated

Yep, upgrade them to CC6 with callpilot. or do they have a VPS card ?? if so use the VPS card to give the announcements. these cards were notoriously flakey at the best of times.. do they have voice mail. either which way your hands are tied using secc ah 25-40b the last of the stable releases !!

Pre rls 22, you needed to go in to debug "$$" to find the password, alternatively if you have a low level password, do an xbk, upgrade to a rls 22 + switch and the rest is what us old Nortel boys do daily

I've had the same issue, this was down to the server itself, stupidly did not check the pvi checker close enough, the server was a DL380 2 x quad core i.e 8 cores, rep server will only work up to quad core, removing the second processor and reinstalling the softwrae resolved the issue

Oh also, if you post this in the symposium forum, you may get more response. J

Hi,tuffrog what patch level are you on on the two problematic CCMS's, Nortel have worked on these issues, and with about su 04 upwards the issues have stopped reoccurring on all our sites. One problem we did see on a customer's site was the Data execution prevention was not turned off, causing...

As BrokenRecord2 has stated CC7 will work on a VMware slice min rls 3.5, CC6 is NOT supported on VM, though it does work, but would not recommend this to any customer. IT IS NOT SUPPORTED BY NORTEL