Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by jake82nd

  1. jake82nd

    CS1K 7.5 cannot fax to outside numbers works fine internally

    The upgrade was a retype so I have found many issues. I did change the dsel to 3vce last night. Will test in a few this morning. Thanks to all for the help.
  2. jake82nd

    CS1K 7.5 cannot fax to outside numbers works fine internally

    We "upgraded" from 25.40B to 7.5 now the fax machines cannot fax external, internal work fine. Analog cards are in the old ipe shelves. PRI NI2 calls sound ok now I had to replace UDT for noise problems. I thought that might be the fix. No Go. Anyone had this issue? Thanks!
  3. jake82nd

    CS1000M SG/CP PIV Rls 6.0 Stuck in split mode.

    We got a maintenance window last night. We tried to unplug the hsp and ini. the inactive side, and tried reloading the inactive side to no avail. We then loaded the latest patches from merl and ini. both sides to no avail. We then reloaded both sides, that got us out of split mode but still...
  4. jake82nd

    CS1000M SG/CP PIV Rls 6.0 Stuck in split mode.

    Tman45, I think when you performed the cutovr command that is where you went from the active database that had all the changes you had made to the inactive for 2 months that had not fully synced yet???? just a guess. Thanks for your help.
  5. jake82nd

    CS1000M SG/CP PIV Rls 6.0 Stuck in split mode.

    Thanks Triton101 but it show split.
  6. jake82nd

    CS1000M SG/CP PIV Rls 6.0 Stuck in split mode.

    Tman45, So you left the HSP unplugged while you INIed the inactive side? Thanks.
  7. jake82nd

    CS1000M SG/CP PIV Rls 6.0 Stuck in split mode.

    I think our messages passed each other not sure if you saw mine. I tried CUTOVR and it would not. Thanks.
  8. jake82nd

    CS1000M SG/CP PIV Rls 6.0 Stuck in split mode.

    Thanks, I tried the CUTOVR command and that would not work either.
  9. jake82nd

    CS1000M SG/CP PIV Rls 6.0 Stuck in split mode.

    when I type JOIN the switch comes back with "Cannot join, the redundant partition is not synced." I have tried to ini. the inactive core as well as reboot the inactive core. They both look ok and it comes back up in split mode. Any Ideas? Thanks.
  10. jake82nd

    Nortel Opt. 11 Rls. 25.40B always goes back into alarm Ld 30

    In my earlier post I was thinking about the man machine interface for fiber remotes off the big switches. At first I started getting bug codes pointing to phones on 2 digital line cards in cabinet 1 card slots 12 and 13. I moved all the phones off those cards to cabinet 3 to see if the trouble...
  11. jake82nd

    Nortel Opt. 11 Rls. 25.40B always goes back into alarm Ld 30

    How do you troubleshoot the fiber connections on an Opt.11. Mine keeps going into alarm, running ld 30 routines, I go in and clear alarms cmaj, cmin all, works for a while and then goes back into alarm condition. I thought you could get into it via mm interface or something like that. I just...
See more

Part and Inventory Search

Back
Top