Recent content by jaimeortega

I tried mlucky's suggestion and did the following... .SWCK .SSCK 1 .dis cc 0 .enl cc 0 I got this message in the terminal console: ALM :0 MAIN INDICATION TIME: 14:36 ERRORS ARE: 00000003 000000FF checking on ssck, it shows that ssck 1 is the active clock now... stat 25 shows the same as...

STAT 25 PRI* TRK LOOP 25 - ENBL FFMT/LCMT/YALMT: ESF/B8Z/FDL SERVICE RESTORE: YES YEL ALM PROCESS: YES ALARM STATUS: NO ALARM CH 01 - IDLE DID VOD * CH 02... ... CH 24 - DCH 25 I did a .dis cc 0 .enl cc 0 .lcnt and the SLIPD keeps on creeping up. -JO

OK here's the output>>> Ld 60 .trck pck .rcnt .lcnt PRI TRK LOOP 25 TRSH CNT: BPU -000 SLIPD -012 (It started at 000 but it's going up) SLIRR -000 CRC -000 LOSFA -000 OS_BPV -000 OS_LOSFA -000 OS_YEL -000 .ssck 0 CLOCK ACTIVE CLOCK CONTROLLER DTI061 PREF - 25 SREF -...

ahhh, just got your post janchundia... let me try it and post the results... Thanks! -JO

Thanks for the quick reply... I did LD 60 TRCK PCK but I don't think I'm doing it right since I don't get any output... just a "." LD 73 prt DDB PREF 25 SREF FREE RUN TRSH 00 RALM 128 BIPC 0 LFAC 0 BIPV 44 SRTK 1 3600 SRNT 1 1 LFAIL 10240 10240 SRIM 1 SRMM 127 ICS Hope that helps... -JO

While looking for something else, I ran into the event log window in OTM. I seem to be having all kinds of sync/clock problems with my switch. Especially the DTA015 error keeps on popping every 30 secs or so. I've tried making sense of the other posts with same error problems but I'm a little...

Hello all, I'm trying to recover Exchange IS using BExec 8.6 on a 2000 server. According to this doc, http://seer.support.veritas.com/docs/246134.htm , I have to create a new exchange server with the same host name in a different forest and use the redirect feature in BExec to restore the IS...

http://seer.support.veritas.com/docs/246134.htm <- restore exchange 2k to recovery server. http://seer.support.veritas.com/docs/247985.htm <- restoring to a different forrest. Hope this helps -JO

Just and update on this one... We got a new ring generator card, installed it and we now have ringing in our analog lines. Thanks everybody!!! -JO

Aha..! If the labels on cover doors are correct, then Shelf 0 loop 12 is the right top cabinet. The one that does not have one of those "Rng Gen" cards. Coniglio might have nailed this problem on the head on the first try. I just need to verify that this is so... -JO

We have 2 cabinets with 3 shelves each. To the left on the top left shelf there is one double wide card with a green light that has a “Rng Gen AC” label on it. Is this the one? The right cabinet does not have this card. It has what looks like a filler. My digital phone, which I’m pretty...

Thanks for the quick replies! I just went and checked and I think all the lines are on the first shelf. This is what I did. LD 81 REQ: LST CUST: 0 DATE: Page: DES: FEAT: DTN The lines in question are all sequential and have the following output 5237 12 0 02 00 OPEN . . 5274 12 0 02...

Hello everybody... This is probably a stupid question so let me send the "I've searched the forum but I haven't been able to find help" disclaimer :-) Anyway, we have some analog ports on our switch that don't seem to have any ringing associated with it. If I put a modem on the line, the modem...

Thanks for the reply... Well it turns out that we used to have an enterprise server but when I moved exchange to a bigger box, I installed the standard version of it. That's why I have 96GB IS with a standard version. So, I need to upgrade to the enterprise version now. Any issues I need to be...

So, I'm getting this error which tells me that my IS is about to crap out on me because of space. I cannot create a new mailbox store either. It tells me that the maximum number of stores has been reached (1 store) which leads me to believe I have the standard version of the SW. But, if I do...