Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by jagrasmick

  1. jagrasmick

    T1 PRI 100D issue

    Finally found the problem. The CO programming was set to National and not custom. The person that found this difference was Jason (720)480-0305 below are his notes on setup. PRI SETUP ON LEGEND/MAGIX Set Frame Format to Extended Super Frame-Lines/trunks?LS/GS/DS1?’Enter Slot’+ Enter?Frame...
  2. jagrasmick

    T1 PRI 100D issue

    I am receiving errors 7001 on all ports of the T1 card. When dialing from outside to a DID number the recording is all circuits are busy. From inside to outside dialing it is a fast busy. I'll have qwest check the B and D channels. I just double checked 832 is not part of the pool. On either...
  3. jagrasmick

    T1 PRI 100D issue

    Almost forgot to add that I am located in Colorado Springs
  4. jagrasmick

    T1 PRI 100D issue

    DS1 INFORMATION DS1 SLOT ATTRIBUTES Slot Type Format Supp Signal LineComp 4 PRI ESF B8ZS DMI-MOS 1 ----------------------------------- ANNOTATION ----------------------------------- PRI INFORMATION Slot 4 Switch: 5ESS System: By...
  5. jagrasmick

    T1 PRI 100D issue

    Approx 2 years ago we moved from a plain T1 to PRI utilizing 100D board. I have been backing up the system and the other day I had to reboot the system and now the T1 won't work either in or outbound. A tech brought in a new switch matched the settings and still won't work. Qwest (local...
See more

Part and Inventory Search

Back
Top