Recent content by Jaccodo

Go find the DTR on the support website. There is a ftp server there to download the software.

My contacts within Avaya design disagree... Connecting AACC SIP to a CS1k RLS 7.5 via a NRS is not supported.

I have installed a SIP CC 7.0 on a live customer site. The installation is improved and the SIP part of the software seems to work o.k. We still have some issues with the robusteness of CCAD in combination with 2050 softphones. This call center is transfering a lot and this causes some problems...

I have wondered too... So, anyone. Rgrds, Jacco

Great news! I will test this tommorrow!! Can you give me the software release and firmware you use? Thanks in advance. Grtz, Jacco

TEN is used to seperate phones to use different Tenants. In the Tenant you can group routes and attendents...etc to be used within this tenant. This can be usefull when there are seperate small company's using the same PABX. The TGAR is used to block phones from using specific routes. If a...

First why do you want enduser to login to TM? They have nothing to look for there. If You mean that user need to be able to use the numbers in the active directory to call to I think you need to setup corperate directory for the phones. Jacco.

Besure to do an enlu and idu before deleting the TNs. INV PRT SETS is NOT 100% accurate. Jacco.

You can edit the vendorlist in de vxshell with command: spRegVendorAdd "vendor_name". As far as I know there is also a patch for this. The patch number is already somewhere on this forum. But I think you need to check the servicedomain name the endpoint is trying to regiter to. Maybe set the...

Keep with the IP recording, that's simple to implement and easy to use. But if you have several TDM recorders in the network it's more difficult to implement and to maintain.

Try not to copy ;-), can cause corruption....

Hello, I know why the Linksys isn't reachable from the CS1000E. The phone-context witch is expected by the Linksys spa962 is different from the phone-context send by the CS1000. So, does anyone know how to manipulate the phone-context on the SPA 962? Jacco.

Update: At the moment I monitored the D-chanel the set wasn't registered. What I get on the D-chanel is: No route to destination. Jacco.

What I did was configure a DSC to the SIP trunk. When I dial from an i.e. 1120E set to the SIP number I get the DCH message: Destination is out of service. Onething else.. I registered an other set (ipDialog Siptone) and this set was working perfectly! So, what I think is the issue here is a...

Upgrading isn't even an option. It will be a new install.... Jacco.