Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Shaun E on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by ivanarizmendi
-
Extreme to Cisco Express 500 trunked uplink
It is very Tricky with Extreme (XOS or Extremeware) stuff: - There is no "native" command in Extreme, You HAVE to define a new 'control' vlan, tagged 100, for example - Now on CISCO side, you HAVE to define Native vlan 100 - You only need 1 uplink to pass all the vlans you want. Saludos from...- ivanarizmendi
- Post #3
- Forum: Extreme Networks networking solutions
-
Basic config summit5i
You HAVE to enable IP FORWARDING, at least globally: enable ipforwarding AND also you can enable/disable ip forwarding vlan xxx (per vlan on/off) It is almost the same as "ip routing" on Cisco With this, you will have now intervlan-routing. (I did not see it enabled on your config) saludos...- ivanarizmendi
- Post #6
- Forum: Extreme Networks networking solutions
