Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by ItsyBitsy

  1. ItsyBitsy

    Is there any software out other than norton 2003?!

    You have not said what you are trying to do or any info on your PC. What do you need Norton or any other program to do for you. Please update.
  2. ItsyBitsy

    no print screen key, how can I emulate alt-print screen?

    In Win XP I think Control PrtScn will copy the page to the clipboard the open Word or Wordpad and paste.
  3. ItsyBitsy

    BIOS

    To acess TSETUP on the Tecra 8100- There are two ways. Turn off the PC/ hold down the ESC key and turn. When it comes up hit F1 and you will get into Setup. The next way is to come up in safe mode. (Hold F8 when Booting) then select safe mode. Go to start/run and type TSETUP and enter. Good luck.
  4. ItsyBitsy

    IBM PS2 8570 - Need general help

    If you have a 8570/80 Reference disk and it will not boot from POR. Check the diskette on another PC. If the diskette is good you may have a bad diskette drive. If you get in touch with meI can help more.
  5. ItsyBitsy

    IBM PS2 8570 - Need general help

    Error codes on IBM PC -- 162 and 163 says that the date and time are not set up; unfortunately to do this you must have an IBM setup diskette for the particular model. As far as the key goes most any IBM PS/2 key will work.
See more

Part and Inventory Search

Back
Top