Recent content by ironwill

Nice! Thank you so much for everyone! this is really a big help for me! Hope to recieve the same response for my future inquiries!

Hi Everyone, I am just only a new starter when it comes to Linux OS. I already installed the OS but i don't know how to use it. May I ask everyone who could give me the best book/s that I should read which is intended for a new one like me.Title of the book that offers the best tutorial I...

Hi to all, Can anyone tell me how to perform the complete configurations of Static Routing for three(3)Linksys routers.Or any tutorial that is available on the internet that I could read. This is because I am trying to learn the advance routing of the router. Any response will be...

Hi, Ever tried changing the SSID of the router to a different SSID?Are you using a built-in wireless card or card from Linksys?Let me know about it. Thanks!

Hi there, I just only would like to ask you guys about the UPnP feature of Linksys Routers.What is the exact use of this and how does it really work? And may I ask about a sample but simple application about this.Thanks!

Hi, I assume that the WRT54G has an IP address of 192.168.1.100,right?Try do the following: 1. Plug one computer straight to the BEFW11S4 to any of the regular ports. - PC --->port 1 2. Check the IP address - for XP/2000 -Start>Run>cmd then Enter -Type...

You can get on the net if you Disable the DHCP capability of the Linksys device and make sure that you'd have to change the IP address of the Linksys box same with the IP segment of your SMC router. Obviously, you can't get on the net if both devices are running DHCP.You may get these work by...

Which address you are referring to,the MAC address located underneath the router or the MAC Address located on the router's Status Page? But which MAC I have to put on the WRE54G,the MAC located underneath the router or the LAN MAC on the Status page of the router? Thank you so much Bill.

Hi, I am setting a WRE54G with a Linksys WRT54G router,i only wanna know which MAC address of the WRT54G i have to put.The MAC address located on the Actual router or the LAN MAC address located under the Status of the router? Because,I have noticed that the MAC address are different,why is...

Well,you made your point Bill.Thanks.

We still haven't tried yet if the Sveasoft firmwares works with the WRE54G,because it's not a Linksys provisioned software unlike Boingo software.It's just only that if Linksys discover that the router is using a different firmware,and there would be a chance that you want to replace it,I think...

In additional to what Bill have said,BEFW11S4 doesn't have the capability support Bridging.You may try to use those AP's of Linksys if you want to make this possible.

Guys, How would I know if a Linksys Device is a WDS Compliant?Does it have a sticker on it saying about it?Any help would be highly appreciated.Thanks in advanced!

Mike, That's nice to hear from you.You got it all working :)

Webmeisterus, Thank you so much for the info :) Two thumbs up for you! Thanks once again.