Recent content by IPslug

Hi, Thanks for all the reply's the $ choice in the menu is best for us that was just what i was looking for. Thanks

Hi Thanks for the reply, If there was only two PIN codes and we were using the check digits action how can i set the action to look at the 2nd PIN number? At the moment the first check digit works fine for for the caller with that PIN but if the other caller rings and enters there PIN the 2nd...

HI I am trying to setup PIN code's for customer's to enter when calling us. I have tried this using the check digits action in VMPro. This works ok for the first code but does not allow me to do a list of codes. Is this action designed for this or is there another way i can do this? Thanks

There is a tick box in the system tab/telephony called allow outgoing transfer, give that a try.

A reboot would be worth doing, what level of software are you running?

Hi, Have you tried setting the caller ID to FSKA?

Are you using a CAT5 lead from phone to power supply and CAT5 from power to wall socket. We had the same issue did this and worked ok after.

There is a feature in 3.1 called twinning if you use this with no voicemail on the system you can get busy tone but it's not an ideal work around.

Hi There is a private build for this problem, we had the same issue and this build sorted it out. Contact your support team and they should sort the bin file out for you.

I have found out today that there has been another patch released for this problem, installed this and all working fine now. Thanks for all your help.

One other thing guys the customer has decided to inform me that when they turn forward unconditional on and leave there phone for about an hour it disables them from the groups. If they turn forwarding on and off within a couple of mins if doesnt disable them, so it seems that its only when...

Hi We have done all this and still no joy. It only appears to happen when the user comes in in the morning and there extension is logged out. They are using PM pro 2.1.10. It seems like it may have something to do with when the pc is restarted, any ideas on this? Thanks Dave Hughes

Done all of that but still no joy, anyone have any other ideas? Thanks

Ok I will do. Thanks

should say Hunt group not hint group. woops!