Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Infotel

  1. Infotel

    Question about VCM

    Hi everybody I have a question about VCM Logical. Someone know if we need to install the VCM32 in the slot one before the combo card if we want the system use the VCM channel from the VCM card first ? That made a couple of installation i see the VCM32 card in slot 4 or 3 after one or 2 combo...
  2. Infotel

    Issue with SIP trunk

    That tell me the never pass the FreePBX ? Also i will see a trace for a trying in the monitor of the IPO Right ?
  3. Infotel

    Issue with SIP trunk

    I have trace all the call by the monitor and no trace from my call in the IP Office monitor...
  4. Infotel

    Issue with SIP trunk

    More trace from the asterix [2016-08-04 21:00:28] VERBOSE[15047][C-000036c5] pbx.c: Executing [tdial@ext-trunk:10] Dial("SIP/Thinktel-00001cbe", "SIP/RBessette/4507524322,300,Tt") in new stack [2016-08-04 21:00:28] VERBOSE[15047][C-000036c5] netsock2.c: Using SIP RTP TOS bits 184 [2016-08-04...
  5. Infotel

    Issue with SIP trunk

    The timeout seems to occur when the provider (ThinkTel) is waiting for the FreePBX to complete the call between itself and the Avaya IP500.
  6. Infotel

    Issue with SIP trunk

    Yes that exactly what i expect. Now i looking a way to modify this 10 second...
  7. Infotel

    Issue with SIP trunk

    Hi Everyone, We expect an issue and try to find a solution. Maybe someone here have allready see this problem. We have a freePBX in a Bunker with a SIP Binding from our provider. In the FreePBX we have program a trunk from the FreePBX to our avaya phone system. In the FreePBX all the DID...
  8. Infotel

    Issue with Server edition and Twinning

    Hi Everyone, I have an issue with a new server edition and twinning. Server edition 9.1 Service pack6 Server machine from Avaya Dell R220 (Primary and secondary) Sip trunk on a VPLS from Videotron Sometime the twinning work sometime not... Not necessary assign to a user but from anybody on...
  9. Infotel

    Looking for reference who using a specific Server Setup

    Hi Everyone, We working on a sell for a big customer and we looking for reference who use a specific setup. There it is : 2 (2 Different site)Avaya IP Office Virtual Server Edition active with SIP Trunk active in both system With full resilience between Primary and Secondary server. 3 other...
  10. Infotel

    BCM450 interoperability

    Hi everyone, i have made a research but find nothing about that. Someone know if BCM400 or BCM450 are compatible with Lync ? It is possible to integrate Lync with the BCM ? Thank for your help Mike
  11. Infotel

    Change DID caller ID

    Thank a lot ! That work now. i'm not far of the answer Answer : 9Nsi514XXXXXXXZ"NAME"
  12. Infotel

    Change DID caller ID

    Hahaha good point !! I have already try my exemple.. But not working. Actually, i have try some conbinaison but i don't have find the good one, that why i'm asking. Maybe it impossible to...Just asking...
  13. Infotel

    Change DID caller ID

    Hi Everyone, I know it possible to change with a PRI-N1 the DID with NsiXXXXXXXXXX or the names with NZ"XXX". But it is possible to change both ? Exemple Nsi5145555555Nz"Test"... Thank you !
  14. Infotel

    Ip Office Firewall

    Hi Everyone, I begin to use the firewall of IP Office directly because i want to set my wan port (lan2) directly with the bublic IP addresse for my oneX mobile VOIP. Actually i use an internal IP Address in DMZ on my router but that make all port open and very bad for my network security...
  15. Infotel

    Backup Contact Store

    Ok i do it again and that work fine There the step i have to do for information Uninstall contact store in the new server delete folder Witness Install contact store Stop contact store service Stop postreg sql service for contact store copy old Witness folder in replacement of new restart...
See more

Part and Inventory Search

Back
Top