Recent content by ii8206

Thanks all ^_^ I can login to CM2.2 via modem. Thanks all again

HI all, I want to dial into the CM2.2 remotely but don't how to setup the ppp login account for SAMP with the USB modem? Thanks all ii8206

Hello, As I forgot the root password of the G700, so how to reset it. Thanks

Hello dwalin, Thanks for your adives. I can get the time/date from my S8300 now ii8206

How to set the time & date on the above devices except through time server? Thanks all

The above command can't apply for 4600 IP Phone,try to set the loss plan using " ch locations-paratment " increase the db loss to "-3" but will also increase the echo sound. ii8206

Hi, I used a command "st ip-board 1b03" to capture the Medpro log & want to know what is "No Routes", How to correct it? Thanks 3/31/2005 10:08 AM - Data Export Voice System name: ITApps -...

Hi isokocons, Replied from Avaya COE they support only Cisco & Avaya brand router. They other brand they didn’t support Please make a ticket to Avaya COE to push them to solve this problem a.s.a.p. ii8206

Hello, Does anyone know that Integrated Management Site Admin Version 2.2 (former ASA) support Microsoft Outlook 2003 for remote alarm alert through exchange client profile? Since their newtwork didn't support SMTP. Thanks all ii8206

Try to enable the Off Premises station to y on page 1 of the Analog Extension and make sure the voice mail message night work after changed. ii8206

Hi All, My Avaya csi installed 1x CLAN (firmware V12) & 1 x MedPro (firmware V95) for the IP phone running on CM2.1. The CLAN TN799DP (V12) can't ping & communicate with Nokia IP350 after connected to the Nokia IP350. It seems not compactable with that Firewall router but the Medpro board no...

I have one MEDPRO & CLAN in my system (G3csiV12) and using G.711.. How many UDP port will be used when making a call to outside? Thanks and Regards, ii8206

I tested it on yesterday The first 4 Port for DID trunks or Analog phones(mix and match) The last 4 port for CO trunks only. ii8206

The result also negative, still need "reset sys 4" to recovy

What is 4+4 for MM714? Thanks