Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by idontread
-
Assistance with Cisco 1721 and Point-to-Point T1
Hope i am not screwing this one up :-) batocaster> IF the p-2-p T1 is provided by the ILEC /Telco company, then try to default setting of the csu/wic (clock line) on both routers. if its just two routers, using static route should be fine. on the serail interfaces, connect them via another ip... -
Cisco WIC-1DSU-T1 line code question.
Ironman2401> The errors shown under 's serv' and 's int s0' etc are 'generally' associated to trouble on the facilities (the entire T1 span). There are 3 basic things to narrow down the trouble to. (1) facilities (or the span), (2) demarc/extended demarc (IW) and (3) serial port/wic on the...
