Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by ic1ssbill

  1. ic1ssbill

    both intercom buttons ring randomly @ ext 10, no trunks in use.

    display says voice messaging system.
  2. ic1ssbill

    both intercom buttons ring randomly @ ext 10, no trunks in use.

    X10 is not assigned to hunt group 7, only partner mail ports (2)
  3. ic1ssbill

    both intercom buttons ring randomly @ ext 10, no trunks in use.

    I have a customer with a Partner ACS R5.0 with an Partner mail VS R5. The intercom buttons ring randomly at Ext 10. No other stations are affected.
  4. ic1ssbill

    Partner 2 and VS in test mode issue

    if it's a VS make sure the license card/port card is in the left most slot.
  5. ic1ssbill

    Delayed Off Prem Forwarding - Legend

    The Magix will not allow ATL sets
  6. ic1ssbill

    IPO 500 FEATURE KEY A-LAW Release Level

    IP500 V1 rev 8.1 is the highest a V1 can go.
  7. ic1ssbill

    Non technical - Query about responsibility of Avaya software downloads

    It's their system, quit complaining,
  8. ic1ssbill

    avaya quick edition release 4

    Installed one once, never heard from the customer again !
  9. ic1ssbill

    operator positon

    The attendant positions are restricted to the 1st and I believe the 5th ( or possibly the 4th, it's been too long.) port of the TDL card or MLX card.
  10. ic1ssbill

    Magix remote call forwarding

    Have you turned on remote call forwarding for the extensions you wish to have this feature ?
  11. ic1ssbill

    Line? Phone System? Both? Neither? Help!

    Are the license file valid?, IP Office will work for 2 hours then quit because of invalid license
  12. ic1ssbill

    Simultaneous Paging on IPO R 9.0.20 build 860

    Thank Guys all was helpful.
  13. ic1ssbill

    Simultaneous Paging on IPO R 9.0.20 build 860

    I have a customer that is replacing their Partner system with an IP Office (not muppet mode)> They were accustomed to using Simultaneous paging . Is there a way to accomplish this in the IP Office ?. The customer has 15 IP phones and an analog trunk for the paging
  14. ic1ssbill

    Need DID to ring on multiple phones - Magix

    What is he software release of the Magix? Group ring wasn't available until Magix r3 or 4
  15. ic1ssbill

    Simultaneous Paging - Partner ACS

    I believe that if you are using the Simultaneous Paging, all extensions need to be assigned to call gr0up 4
See more

Part and Inventory Search

Back
Top