Recent content by hwngambler

do you have any phones that are out of service J Cadina IV AKA (HWNGAMBER)

sounds like you have some ip phones in you're phone system J Cadina IV AKA (HWNGAMBER)

that was the only log number. The problem was that in unit 1 it had to be local thats why it had a conflict. Thanks for the help any way guys. J Cadina IV AKA (HWNGAMBER)

I done all these procedures do have any ideas J Cadina IV AKA (HWNGAMBER)

Hey guys I installed a 9115 everthing is programmed. The only thing I get on the phone is time and date from the 81c. I check the display log and I find a log 79 has anybody seen this if so could you help. Also I can ping the 9115 gateway and the IP it's self. J Cadina IV AKA (HWNGAMBER)

9115 problem: I have just installed a 9115 I have everything programmed I have time and date on the phone but nothing on the keys. I check the display logs and I get a log 79. Has anybody run into this if so let me know what to do. J Cadina IV AKA (HWNGAMBER)

how much do have set up let me know what you have done maybe I can help J Cadina IV AKA (HWNGAMBER)

Take a look at periphonics, I think they will have somthing to offer to you. J Cadina IV AKA (HWNGAMBER)

Can somebody tell whats needed to program a bri in the PBX for a 9150. also just to let you know that the 9150 will dial to the PBX for the QOS. The 9150 are up and running on the IP great I just need to Iniate the QOS side. could sombody show a data of the PBX trunk programing. MANY THANKS J...

Jason, I'm on a wan also on the NLP I know you want me to try less agressive but on which side RLC or 9150 also their using some switches and some routers, should I have use the diffserv for the routers and the 802.1 for the switches is this a must? J Cadina IV AKA (HWNGAMBER)

Hi I'm loking for some help on my 9150 problem. I've installed 13 9150 and they all have the same problem witch is clipping during a conversation. All these 9150's are on different parts of the networks. Also I think I have bandwith issues because their are certian sites that are use MCRS and...

No, but make sure you use an epson printer you could even use an epson bubble jet if you want to I hook them up and the bubble jets work great. But for some reason nortel wants you to use epson printers. J Cadina IV AKA (HWNGAMBER)

Hi, alanh1 the question you are asking all depends on how much you want to spend. The reason why I say that is because you are stepping out in business world were you would need a phone system which whould do what you wan't and then some. If you have more questions let me know. J Cadina IV AKA...

Depending on you're version of software for the phone system you can do a graceful shut down. The voice mail can also do a graceful shut down as well. J Cadina IV AKA (HWNGAMBER)

the newest release is 25.40 I think it came out in 2/02 J Cadina IV AKA (HWNGAMBER)