Recent content by HIREI

Thank you all!!! "using the phone menu" and "on the BASIC3 tab to present the main published number" sounds reasonably. Thanks for pdf. The matter is that some mobile operators in Russia displays Generic number in ISUP IAM message instead of Calling Party Number. We at AXE-10 suppress...

In MML language we could put something like this: XXXXC:EXTNUM=3543, PRESCAL=CLIRPERM; But, of course, this is not a HiPath case.

Thanks! We discussed "SUPPRCPN" (Suppress Calling Party Number) but we think that in this case AXE-10 will receive no CgPN. I've downloaded v5 manual and find this: PRESCAL Presentation of calling line number Type of Input : single value, 4. parameter of a min-1-group (CHANGE) single value...

Now we have all the same but Presentation Ind. = Allowed. So, the question how to change Allowed to Restricted.

Thanks for the replay! I'm trying to send the calling party number, for example, 3543, to the AXE-10 exchange and 'say' this exchange that the number presentation is restricted. In other words, SETUP message must include: Calling party number=3543 Presentation indicator=Restricted For...

Hi, all! Please, how to set "presentation restricted" on analog or digital port? For example, we have ext. number (local port) 3543, and for external calls through PRI EDSS1 we should have in SETUP message Calling Party Number (CgPN)=3543 and CgPN Presentation Ind.=Restricted not Allowed. What...

Hi, I think it's better to ask Moscow Ericsson office about it. Or at Satel forum.

Hi, 1) Try to extei if analog or ksexi if digital on this port and show us the response? 2) Insert the board to the other position.

Imho, it depends on PBX and phone version.

BC3.3 LZY20302020/6 R2X

Hi, acc.to RFBOI (user of this Forum): BC6.0 LZY2030652/2 BC7.2.1 (CNI31-33) LZY2030652/10

Daddy, thanks for iomega/FISBI tip! And for minix answer.

Yes, FTP is a good solution but with NIU (Ethernet port)? And we have IPU (no eth ports), BC9 CNI76.

http://minix1.woodhull.com/faq/mxfromlx.html ?

Thanks for yor answer! whosrdaddy, you will be to laugh but we trying to copy backup to "external media", for example, to diskette, disc etc because we now have not driver for SCSI-card. We have old Ericsson PC, SCSI-card in it, SCSI cable for IPU but not the driver for this card... so, MDDT...